Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

ERR on an Amana dryer means the door has not been completely closed and latched — the dryer will not run until it is. How to engage the latch, and the power-cycle test if the code sticks.

F6 E3 on an Amana oven points at the Appliance Manager or the associated wiring. It is a high-severity code that is not owner-fixable: run the one-minute power cycle, then schedule service.

F20 on an Amana front load washer is a water inlet problem — no water, or not enough of it. The three supply checks that solve most of them, and the reset that clears the code.

F21 on an Amana front load washer indicates a drain problem. The two hose questions that explain most of them, plus the five-minute power reset that clears the latched code.

F8E6 on an Amana washer does not carry one meaning across every model. The documented cause is reversed inlet hoses — cold on the hot inlet and hot on the cold. How to check and reset.

FH on an Amana front load washer means a water inlet problem — no or insufficient water supply. Cancel the cycle with PAUSE/CANCEL twice before you check anything, then work the supply.

The Fill or Sensing light on an Amana washer is not an error. With the Water Level knob on Auto Sensing the washer fills and senses load size and balance — and an open lid pauses it.

Multiple lights flashing on an Amana washer means the self-correction cycle ran and failed — the machine could not level or even out the load. What that tells you, and the reset that follows.

A flashing indicator on a JennAir electric or induction cooktop means a key is stuck down — or, on induction, that the pan is wrong. How to tell the two apart and clear each one.

When every cycle and option light flashes on a Kenmore dishwasher, the cycle is suspended — normally because the door was opened mid-run to add an item. What the pattern means and how to reset it.

The Sani LED on a Kenmore dishwasher flashes when sanitising temperature was never reached. Start at the faucet: run the hot water 30 seconds, then work back through the door and the control.

A09 on a Kenmore washer is a water inlet problem — no water or insufficient supply. Four supply checks including frozen hoses, the power-cycle and restart sequence, and when to call.

Disassembly guide for a GE washer: the quarter-inch hex nut driver and putty knife the cabinet actually needs, the five ways in ranked by how often a repair uses them, and where the job stops.

Disassembly guide for a KitchenAid dishwasher: the Torx T20 and quarter-inch hex work the door and toe grille actually need, why the breaker is the only isolation on a direct-wired unit, and where the job stops.

Disassembly guide for an LG refrigerator: the 5/16-inch hex nut driver its panels actually need, the six ways into the cabinet ranked by how often a repair uses them, and the sealed-system line the job stops at.

Disassembly guide for a Whirlpool oven: the 1/4-inch hex and Torx T20 drivers it actually needs, the five ways in ranked by how often a repair uses them, and the door-hinge line the job stops at.

Disassembly guide for a Whirlpool refrigerator: the two hex sizes and the Torx T20 the cabinet actually needs, the six ways in ranked by how often a repair uses them, and where the job stops.
All 46 documented Whirlpool microwave error codes, grouped by subsystem — thermistors, oven-side heat, gas sensing, panel, venting and connectivity — with what a reset does and does not clear.

All five documented Bosch and Gaggenau dishwasher error codes, what each one means, how serious it is, and why none of them is a homeowner fix.

All six documented Haier refrigerator error codes, what each sensor fault means for the cabinet temperature, and which ones need a technician the same day.

All six documented Hisense dishwasher error codes, the one a homeowner can clear, and the anti-flood code that means stop running the machine.

All six documented Midea washer error codes, the three an owner can clear without tools, and what a code that keeps coming back is really reporting.

Open up a Bosch wall oven or slide-in range for repair access: the Torx T20/T15 split, why the spring-hinged door comes off before the fascia, the routes to the control module and rear panel, and where the job stops.

Open up a GE freestanding or slide-in electric range for repair access: why the tool list starts with a quarter-inch nut driver, the anti-tip bracket, the backguard route to the control module, and where the job stops.
How a Bosch refrigerator comes apart: the Torx sizes you actually need, which panel reaches which component, and the sealed-system boundary a DIY teardown must not cross.

A Frigidaire refrigerator uses two different drive systems on one cabinet. Which tools to stage, which panel reaches which part, and where the teardown has to stop.

A GE refrigerator opens with nut drivers, not screwdrivers. The two hex sizes that do the work, what each panel reaches, and the boundary where access work ends.

Samsung refrigerator teardown: one hex size and a meter, why most panels come off to test rather than to pull, and the sealed-system line a DIY repair stops at.

How a Frigidaire dishwasher comes apart: the three drive types on one cabinet, why this is the only brand here whose tool list includes a multimeter, and where access work stops and diagnosis begins.

How a GE dishwasher comes apart: a three-tool teardown, what the missing star drive, prying tool and meter each tell you about the cabinet, and the isolation limits that follow from them.
Let our professional technicians help. Same-day service available.