Amana Washer Multiple Lights Flashing: Why
multiple lights flashing on an Amana washer means the machine already tried to fix the load itself and could not — if the washer fails to level or even out the load during the self-correction cycle, it displays an error message.
EasyBear is an independent appliance repair company. We are not affiliated with or authorized by Amana.
The machine tried first#
The important word in that description is self-correction. A modern Amana washer does not report an uneven load the moment it detects one. It attempts to redistribute the laundry on its own, re-running the balance routine, and only signals when that attempt has failed.
That changes how you should read the flashing panel. It is not the first line of defence; it is the report that the first line of defence was already used up. Which is also why simply restarting the same load without touching it tends to reproduce the same result — the washer has already had its go.
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What the flashing is reporting#
| What happened | What the panel does |
|---|---|
| The washer runs its self-correction cycle on an out-of-balance load | Nothing is displayed while it is still trying |
| The self-correction cycle fails to level or even out the load | An error message is displayed — the flashing you are looking at |
For how to correct out-of-balance loads and how to prevent them from occurring, the manufacturer's own reference is its "Washer is Unbalanced or Overloaded" guidance, and that is the material this indicator is pointing you toward.
What to do next#
- Treat the load, not the machine — the flashing is a report about what is in the drum, and the load is the thing that changed.
- Reset the control afterwards: if your washer is plugged into an outlet, unplug the unit for 5 minutes and then plug the unit back in.
- Watch whether the flashing returns on a load you have rearranged, because that distinction is the whole diagnosis.
A pattern that clears with the load is a loading habit. A pattern that follows the machine across different loads is something else, and the difference is worth establishing before anyone opens the cabinet.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Is it worth repairing?#
In the common case there is nothing to repair. An occasional failed self-correction on a genuinely awkward load is the system behaving as designed, and it costs nothing but the time to rearrange and restart.
The case that earns a service visit is a washer that flashes on loads which are demonstrably even, after a full power reset. At that point the machine is failing to level a load that is already level, or failing to see that it succeeded — and the control panel is the part associated with this behaviour. Testing it is a technician's call, because the alternative is replacing the most expensive part on the machine on a hunch.
Get the balance system tested#
If your Amana washer keeps flashing on loads that are evenly distributed and a reset has not changed it, an EasyBear technician can test the balance sensing and the control panel and tell you which one is wrong. Book a visit online.
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
