Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

Electrolux washer E40 means the door is not closed — the board never saw the latch switch close. Easy DIY checks first, up to $100 if a part is needed.

Electrolux washer E41 is a door-lock failure — the door is shut but the lock never confirmed. Causes, DIY checks, and a $100–$250 professional range.

E50 on a Electrolux washer: a drive-motor failure. What it means, likely causes, safe DIY checks, and whether it's worth repairing.

Electrolux washer E52 is a motor signal error — the board drives the motor but gets no feedback. Often a cheap tach coil. DIY signs and a $150–$400 range.

FL on a Electrolux washer: a high-water-level fault. What it means, likely causes, safe DIY checks, and whether it's worth repairing.

Electrolux washer Ld means long drain — the tub did not empty in time, usually a clogged pump filter. DIY steps plus an $80–$250 professional range.

Electrolux washer LF means long fill — water is arriving too slowly to reach level in time. Easy DIY supply checks plus a $50–$200 professional range.

lid on a Electrolux washer: a lid-not-closed error. What it means, likely causes, safe DIY checks, and whether it's worth repairing.

Electrolux washer oL means overloaded — the drum is packed too tightly. Almost always a free fix: remove some laundry. DIY steps and an up-to-$130 range.

Electrolux washer Sd means excess suds — usually too much detergent or non-HE soap. A free fix in most cases. DIY steps and an up-to-$130 range.

uL on a Electrolux washer: an unbalanced load. What it means, likely causes, safe DIY checks, and whether it's worth repairing.

GE dishwasher C1 is a stuck-key error, usually from steam moisture. See how to dry and reset the panel and the $120–$300 repair cost.

GE dishwasher C3 is a pump pressure-switch error affecting wash. See why to clean the filter first and the $200–$450 repair cost.

GE dishwasher C6 is a turbidity-sensor error, often just mineral buildup. See the cleaning fix, the related C7 code, and the $100–$280 cost.

GE dishwasher PF means a power failure was detected, often from a shared circuit. See how to clear it and why repairs rarely top $200.

GE oven F0 means a stuck keypanel key, often from moisture. See how to dry and reset the panel and the $150–$350 repair range.

GE oven F1 flags a control (ERC) or keypanel fault the board cannot pin to one key. See how to isolate it and the $180–$400 repair cost.

GE oven F2 is an over-temperature safety code — stop using the oven. See why the sensor is usually to blame and the $120–$380 repair cost.

GE oven F3 means an open oven sensor (RTD) — the oven will not heat. See how to test the sensor and the $100–$250 repair cost.

GE oven F4 is a shorted oven sensor — heat may be erratic or refused. See how to test for a short and the $100–$250 repair cost.

GE oven F5 is an ERC self-diagnosed control-board failure. See why no keypanel fix will help and the $250–$500 repair cost.

GE oven F7 flags a stuck function key on the panel. See how to clean, reseat, and confirm it, and the $130–$300 repair cost.

GE oven F9 is a door-lock circuit error, common around self-clean. See safe steps, why not to force the door, and the $120–$280 repair cost.

GE oven FD means a shorted meat probe — usually just a dirty jack. See the quick owner fix and the low $30–$150 repair cost.

GE refrigerator CC is a compressor control error and the fridge stops cooling. See causes, why to test the inverter first, and the $350–$900 cost.

GE refrigerator CI flags an ice-maker communication error. See the likely causes, safe DIY checks, and the $200–$420 repair range.

GE refrigerator dE flags a defrost error, so frost builds on the coils. See the causes, DIY limits, and the $200–$450 repair cost.

GE refrigerator showing FF? It flags a freezer evaporator fan fault. See causes, DIY checks, and the $180–$350 repair cost.

GE refrigerator PF means a power failure was detected. Learn how to clear it, protect your food, and why repairs rarely top $150.

GE washer E2 is a drain error — water left in the tub. See the owner-friendly filter and hose checks and the $50–$250 repair cost.
Let our professional technicians help. Same-day service available.