Want a regional phone & address? Pick your area.
Frigidaire·Washerhigh severity
Frigidaire Washer Error Code E35
Water level above maximum
Common Causes
- 1Pressure switch failure
- 2Air trap blockage
- 3Water inlet valve stuck open
Flood risk. Turn off water supply valves immediately. A stuck inlet valve can flood the laundry area within minutes.
Step-by-Step Troubleshooting
- 1
Immediately unplug washer and turn off water supply valves
- 2
Blow gently into the pressure switch hose — listen for a click from the switch
- 3
Inspect air trap at bottom of tub for detergent buildup or debris
- 4
Check if water continues entering with power off — if yes, inlet valve is stuck
Pro Diagnostic Tip
Blow gently into the pressure switch hose — you should hear a click. No click = failed switch. If switch clicks but E35 persists, the air trap is blocked with detergent residue.
You Might Also Notice
- •Water overflowing from tub
- •Washer fills continuously
- •Water on floor around washer
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$125–$275
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
137015300 pressure switch137353500 water inlet valve
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E35 is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Frigidaire error code E35 mean?
Frigidaire error code E35 indicates: Water level above maximum. This is a high-severity issue affecting your washer.
How do I fix Frigidaire error code E35?
Immediately unplug washer and turn off water supply valves Then, Blow gently into the pressure switch hose — listen for a click from the switch Then, Inspect air trap at bottom of tub for detergent buildup or debris There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E35?
Besides the error code on the display, common signs include: Water overflowing from tub; Washer fills continuously; Water on floor around washer. If you notice any of these symptoms, check your washer's display panel for error code E35.
How much does it cost to fix Frigidaire E35?
Repair costs for Frigidaire E35 typically range from $125 to $275 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.