Verified
“Induction cooktop had one dead burner. Control board issue — tech ordered the part and came back next day to install. Works perfectly.”
Karen P.
Cooktop Repair
Cooktop Repair
Professional cooktop repair service across San Francisco and Bay Area
Same-Day Service
90-Day Warranty
Fixed or It's Free
Typical Cost: $100-$400
Book a Free Diagnostic Visit — Fully Online
Same-day cooktop repair across San Francisco and Bay Area
Free DiagnosisSame-Day Service90-Day Warranty
Real Cooktop Repairs by Our Technicians
How Much Does Cooktop Repair Cost?
Cooktop repair cost depends on the type (gas, electric, or induction) and the specific fault. Burner igniter replacement is the most common and straightforward fix. Glass top replacement is the most involved. Schedule a free diagnostic for an exact quote.
- Burner igniter replacement — most common fix
- Control knob / switch repair
- Spark module replacement
- Induction coil replacement
- Glass top replacement — the most involved repair
What Are the Most Common Cooktop Problems?
Burner won't ignite
Weak flame
Continuous clicking
Burner not heating
Can't adjust heat
Indicator light issues
Do You Have the Right Tools?
Multimeter ($85), vacuum pump ($250), diagnostic software, and specialized hand tools. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What Cooktop Issues Do We Fix?
Cooktop Burner Not Lighting
medium priorityA gas cooktop burner that won't light is a common issue. A clogged burner port, a faulty spark igniter, or a defective spark module can all prevent ignition. Our technicians clean, test, and repair the ignition system to restore reliable burner operation.
Clogged burner portFaulty spark igniterDefective spark module
Cost: $100-$250Time: 30-60 minutes
Cooktop Element Not Heating
high priorityAn electric cooktop element that won't heat up leaves you unable to cook. A burned-out element, a faulty infinite switch, or a broken element receptacle are the most common causes. We replace the failed components and test for proper heat output.
Burned-out heating elementFaulty infinite switchBroken element receptacle
Cost: $100-$300Time: 30-60 minutes
Cooktop Glass Surface Cracked
high priorityA cracked glass cooktop is both a safety hazard and a functional problem. Cracks can spread, expose electrical components, and allow spills to reach wiring. We replace the glass surface with a manufacturer-specified replacement to restore safe cooking.
Get Your Cooktop Fixed Today
Free diagnosis when you book online
Free DiagnosisSame-Day Service90-Day Warranty
Why Choose EasyBear?
Same-Day Service
Most repairs completed same day
90-Day Warranty
Comprehensive coverage
No Diagnostic Fee
Free inspection
Safety First — Know the Risks
Appliances involve high voltage (120-240V), pressurized water, gas lines, and chemical refrigerants. Over 400 DIY repair injuries are reported yearly. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Book a Free Diagnostic Visit — Fully Online
Free DiagnosisSame-Day Service90-Day Warranty
Frequently Asked Questions
Cooktop repair costs range from $100-$500, averaging $275. Common repairs include burner igniter replacement ($100-$200), control knob replacement ($75-$150), and glass top replacement ($250-$500).
Common causes include clogged burner ports (clean with pin or toothpick), faulty igniter, broken ignition switch, or moisture in burner. Make sure burner caps are seated properly and ports are clean.
Cooktop repairs typically cost between $150 and $500, with the average around $300. Electric element replacement costs $100–$250, gas burner valve replacement costs $150–$350, and glass cooktop surface replacement runs $300–$600. Induction cooktops generally cost more to repair due to specialized electronic components.
A non-heating electric burner is usually caused by a burned-out element, a faulty infinite switch (the dial that controls temperature), or a broken connection in the wiring. For smooth-top cooktops, the radiant element underneath the glass may have failed. Try swapping the element with another burner to test. Element replacement costs $100–$250.
The most common causes are a dirty igniter electrode, moisture on the igniter from cleaning, a clogged burner port, or a faulty spark module. Clean the igniter with a dry toothbrush, ensure burner caps are properly aligned, and check that the burner holes aren't clogged with food debris. If cleaning doesn't help, the spark module may need replacement ($100–$200).
Minor scratches can be buffed out with a glass cooktop polishing kit, but cracks cannot be safely repaired. A cracked glass cooktop should be replaced because cracks can allow moisture to reach the electrical components underneath, creating a shock or fire hazard. Glass cooktop replacement costs $300–$600 including the panel and labor.
Most cooktop repairs take 45 minutes to 1.5 hours. Electric element and switch replacements take about 45 minutes. Gas burner valve repairs take 1–1.5 hours. Glass cooktop surface replacement takes 1–2 hours. Built-in cooktops may require additional time for removal and reinstallation from the countertop.
Continuous clicking after the burner is lit is usually caused by moisture on the igniter, a misaligned burner cap, food debris in the igniter area, or a faulty spark module. Dry the igniter thoroughly, ensure the burner cap sits flat, and clean around the igniter electrode. If clicking persists, the spark module may need replacement.
Gas cooktops typically last 15–20 years, electric coil cooktops last 13–18 years, and smooth glass cooktops last 10–15 years. Induction cooktops last 8–12 years due to the complex electronics. Regular cleaning and avoiding impacts (on glass tops) significantly extend the lifespan.
Yes, you can safely use the other working burners as long as the broken burner isn't leaking gas. If you smell gas when the broken burner is in the off position, turn off the gas supply and call for immediate repair. A non-igniting burner that doesn't leak is just inconvenient, not dangerous.
Common induction error codes indicate incompatible cookware (not magnetic), overheating protection activated, a faulty temperature sensor, or a power supply issue. Ensure you're using induction-compatible cookware (a magnet should stick to the bottom). If the error persists with proper cookware, the control board or sensor may need replacement ($150–$400).
Light scratches can be minimized with a glass cooktop polishing cream and a soft cloth, using circular motions. For deeper scratches, a cerium oxide polishing compound works well. Prevent scratches by using flat-bottomed cookware, lifting pots instead of sliding them, and cleaning with a dedicated cooktop scraper and non-abrasive cleaner.
Yes, most gas cooktops can be converted using a conversion kit specific to your model ($30–$80). The process involves replacing burner orifices and adjusting the gas pressure regulator. This should always be done by a licensed professional due to the gas leak risk. Conversion service typically costs $100–$200 including the kit.
A completely dead cooktop usually indicates a tripped breaker (cooktops use a dedicated 40–50 amp circuit), a blown thermal fuse, or a faulty main control board. Check your breaker panel first — if it trips again immediately, there may be a short circuit requiring professional repair. Control board replacement costs $200–$400.
Clean your cooktop after every use to prevent buildup. For glass tops, use a dedicated scraper for stuck-on food and a cream cleaner. For gas, keep burner ports clear and clean igniters with a dry brush monthly. Check gas connections annually for leaks using soapy water. Never use abrasive cleaners on glass or stainless surfaces.
Electric cooktop repairs focus on elements and switches and are generally the most affordable ($100–$300). Gas repairs involve valves, igniters, and burners, with costs around $150–$350. Induction repairs are the most complex and expensive ($200–$500) due to electronic control boards and coils. All three types have roughly the same repair time.
Yes, we repair downdraft ventilation systems including fan motors, control switches, and vent mechanisms. Common issues include a fan that won't raise or lower, weak suction, or excessive noise. Fan motor replacement costs $150–$300, while the raise/lower mechanism repair runs $100–$250. These systems require specialized knowledge due to their built-in design.
A yellow or weak flame indicates incomplete combustion, often caused by clogged burner ports, a dirty air shutter, or incorrect gas pressure. Clean the burner holes with a pin or needle, ensure the burner cap is seated correctly, and check that the air shutter is properly adjusted. A yellow flame produces carbon monoxide — have it fixed promptly. Burner cleaning service costs $75–$150.
Other Repair Services
Need Cooktop Repair?
Book your same-day repair service now
Free DiagnosisSame-Day Service90-Day Warranty