What F13 means
For F13, the brand’s reading points inside the touch control module: an internal communication error. That leaves little for an owner to check beyond a reset and a dry, cool panel.
Error codes
Reference| Code | Meaning |
|---|---|
| F13 | There is an internal communication error on the touch control module . |
What you observe
- Keys do not respond, or respond erratically — The module that reads them is faulting.
- The display shows the code at power-up — The module checks itself as soon as power arrives.
- The code follows heat or steam near the controls — Heat and moisture stress the module.
- NEAR MISS: a pan or spill sits on the controls — That is pressure on the panel, a different code; clear it first.
What usually sets this code
- Touch control module failed — The most likely cause: the reading points inside the module, and an internal fault that survives a reset means the module itself.
- Passing error after a power event — Second: a one-off power disturbance that a clean restart resolves.
- Heat or moisture reaching the module — Third: steam, spills or heat from cookware near the controls stress the module and trigger errors.
- Supply problem to the cooktop — Last: a poor supply, which usually affects more than the cooktop.
Check in this order
- Breaker reset — The one step that separates a one-off from a failed module.
- Note when it appears — At power-up, during cooking or after cleaning: each points somewhere different.
- Check other appliances after a power event — If others glitched too, the reset is probably the whole fix.
- Book module replacement if it returns — There is nothing else for an owner to test.
Clearing the code, then checking
- Breaker reset — Switch the cooktop’s breaker off for a minute, then back on.
About 2 min
- Watch the next cook — Cook normally and note whether, and when, the code returns.
Tools: notepad or phoneAbout 2 min
- Keep cookware off the controls — Move pans and utensils clear of the touch area while cooking.
About 1 min
- STOP if the code returns a second time — Two returns after a clean reset rule out a passing glitch; what is left sits behind panels.
Safety for this cooktop
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. On a cooktop that usually means the breaker, because the unit is wired into a junction box under the counter. Do not use a cooktop with cracked glass.
When to call a technician
Call when the code returns after a breaker reset, or appears at every power-up. An internal module fault is fixed by replacing the touch control module under the glass, which means lifting the cooktop with the power off.
Other Amana cooktop codes close to this one
Which models this reading covers
Generalized information for Amana electric and induction cooktops with touch controls. It is not a reading for Amana gas cooktops, Amana ranges, whose surface codes are listed with the oven codes, or sister brands on the same platform, whose lists can read differently. The details that change inside the line, such as wiring colours, part numbers and connector locations, belong on model pages, and none is published for F13 yet.
All Amana cooktop codes
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
