Start here
The models in the matrix below are what Amana ART covers. The matrix on this page is the definitive list for this family: six model numbers. They share a cabinet architecture and a parts catalogue, and the air path is where most of what goes wrong on them lives.
What goes wrong on these models
- The cabinet is warm while the unit is still running — Warm cabinet, compressor still running. Frost on the freezer rear wall and a fresh-food side that warms first point at defrost or a fan. See: Amana ART Refrigerator: Not Cooling or Not Freezing. — Slug: amana-amana-refrigerator-art-refrigerator-cooling-failure — Title: Amana ART Refrigerator: Not Cooling or Not Freezing
- Water under the crispers, on the floor, or ice on the freezer floor — Any water outside the drain pan. Melt water is the drain; clean water at the back with the supply live is a joint. See: Amana ART Refrigerator: Water Leak. — Slug: amana-amana-refrigerator-art-refrigerator-water-leak — Title: Amana ART Refrigerator: Water Leak
- No ice, hollow cubes or a bin that fills too slowly — Ice that shrank before it stopped. That is a restriction — usually the filter — rather than a failed module. See: Amana ART Refrigerator: Ice Maker Fault. — Slug: amana-amana-refrigerator-art-refrigerator-ice-production — Title: Amana ART Refrigerator: Ice Maker Fault
- A new rattle, chirp, roar or repeating click — Rattles at the back, chirps inside the freezer, or a hum through the floor. Location names the part before anything is opened. See: Amana ART Refrigerator: Abnormal Noise or Vibration. — Slug: amana-amana-refrigerator-art-refrigerator-abnormal-noise — Title: Amana ART Refrigerator: Abnormal Noise or Vibration
The problems in frequency order
- Loss of cooling with the unit still running — The leading complaint on the ART line. A compressor that still runs points at the air path, which is where three of the four checks live.
- A leak inside the cabinet or onto the floor — Second: the defrost drain carries debris through the coldest part of the cabinet, so it silts and then freezes shut.
- Ice production stopped or degraded — Third: an empty bin is often the earliest sign that the freezer is running warm, rather than an ice-maker fault at all.
- A running noise that has changed — Fourth: two fans, the compressor mounts and the cabinet's levelling account for nearly all of it, much of it without a part.
Models in the ART family
Reference| Model number | Family key |
|---|---|
| ART104TFD*0* | amana:refrigerator:art |
| ART106TFD*0* | amana:refrigerator:art |
| ART308FFD* | amana:refrigerator:art |
| ART316TFD*0* | amana:refrigerator:art |
| ART318FFD* | amana:refrigerator:art |
| ART348FFF*** | amana:refrigerator:art |
Before you open anything
Safety
Isolate the appliance at its breaker or unplug it before any panel comes off — a capacitor can hold a charge after the power is off. The refrigerant circuit is licensed work and is not an owner repair at any point. Empty the cabinet before moving it.
The service-call line
The test on these models is whether the next step needs a gauge set, a meter or the freezer emptied. If it does, book a visit; oil at the compressor or a tripping breaker means today.
Nearest pages of this class
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.