Dryer motor runs but drum won't spin? We fix belts, rollers, and motors. Same-day service, 90-day warranty. Average repair cost: $100–$300. Professional service recommended.
Dryer won't tumble repair typically costs $100 to $300. This repair requires professional tools and expertise. Most repairs are completed in 1-2 hours with a free diagnostic visit.
Union City's large 3.3-person households run dryers at the highest frequency in the East Bay, compressing belt lifespan to 5-7 years through sheer cycle count. Heavy loads also stress rollers and motor bearings. Alameda County water at 240 TDS adds moderate glide wear. Eight providers serve the area with Fremont supplementation.
Union City's largest households compress component lifespans through high cycle counts and heavy loads. Water at 240 TDS wears glides. Eight providers serve locally.
Broken drive belt
Failed drum rollers
Worn drum bearing
Seized idler pulley
Motor failure
The thin flat belt wrapping around the drum snaps from age, heat exposure, and dry rot. In Bay Area garages where temperature swings between fog-cooled mornings and afternoon warmth cycle the rubber daily, belts deteriorate faster. The motor hums but the drum sits still.
Cost: $100–$180 | Time: 40-55 minutes
The spring-loaded idler pulley maintains belt tension. Its bearing seizes from lint infiltration and heat stress, causing the belt to slip off or snap. A squealing sound before the drum stopped turning is a telltale sign of idler failure.
Cost: $100–$200 | Time: 40-50 minutes
When drum rollers wear flat or seize entirely, the motor cannot overcome the friction to turn the drum. The motor may trip its thermal overload and shut off. In Bay Area homes running daily loads of heavier fabrics (blankets, comforters), roller wear is accelerated.
Cost: $130–$260 | Time: 45-70 minutes
The drive motor itself can fail from overheating caused by restricted venting or from age. The motor either does not run at all or hums without turning. Burnt smell from the motor area confirms failure. Bay Area homes with vent restrictions compound motor thermal stress.
Cost: $180–$300 | Time: 60-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $100–$300 |
| Repair time | 1-2 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
This repair involves electrical components or sealed systems requiring professional tools and certification.
Bay Area dryer tumble repairs average $100-$300. Union City has 8 providers. Fremont's 22 supplement. Consider upgrading to heavy-duty belt on replacement. Diagnostic fees of $89-$129 are waived with repair.
Free diagnostic visit for won't tumble issues. Same-day appointments available in Union City.
Book Free DiagnosticReviewed by Diana Kowalski, Laundry Systems Specialist