Want a regional phone & address? Pick your area.
Whirlpool·Washerlow severity
Whirlpool Error Code HC
Hot/cold hoses reversed
Common Causes
- 1Hoses connected to wrong inlets
Step-by-Step Troubleshooting
- 1
Check the hose connections at the back of the washer — hot (red/left) should connect to the hot valve, cold (blue/right) to cold
- 2
Also verify the hoses are correctly matched at the wall valve end
- 3
After swapping, run a hot water cycle and feel the door glass (front-load) or open the lid during fill (top-load) to confirm hot water arrives when expected
Pro Diagnostic Tip
The Adaptive Wash temperature sensor detects that the hot inlet delivers cold water and vice versa. This code only appears on models with thermistors on both inlet paths. On Amana models, which often lack dual thermistors, reversed hoses go undetected and simply wash at wrong temperatures.
You Might Also Notice
- •Hot water cycle uses cold water
- •Cold water cycle uses hot water
- •Clothes shrink on cold-water settings
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$0
Parts + labor. Free diagnosis with repair.
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Swap hot and cold water supply hoses
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code HC disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Whirlpool error code HC mean?
Whirlpool error code HC indicates: Hot/cold hoses reversed. This is a low-severity issue affecting your washer.
How do I fix Whirlpool error code HC?
Check the hose connections at the back of the washer — hot (red/left) should connect to the hot valve, cold (blue/right) to cold Then, Also verify the hoses are correctly matched at the wall valve end Then, After swapping, run a hot water cycle and feel the door glass (front-load) or open the lid during fill (top-load) to confirm hot water arrives when expected If these steps don't resolve the error, contact a professional.
How do I know if my washer has error HC?
Besides the error code on the display, common signs include: Hot water cycle uses cold water; Cold water cycle uses hot water; Clothes shrink on cold-water settings. If you notice any of these symptoms, check your washer's display panel for error code HC.
How much does it cost to fix Whirlpool HC?
Repair costs for Whirlpool HC typically range from $0 to $0 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.