Want a regional phone & address? Pick your area.
Whirlpool·Washerlow severity
Whirlpool Error Code F0E5
Load imbalance
Common Causes
- 1Uneven load
Step-by-Step Troubleshooting
- 1
Pause the cycle, open the door, and manually redistribute items evenly around the drum
- 2
Remove any single heavy item (jeans, towels) and wash separately or with similar-weight items
- 3
Check that the washer is level using a bubble level on top — adjust leveling feet as needed
- 4
Inspect suspension rods (front-load) or springs (top-load) for damage or detachment
Pro Diagnostic Tip
On Whirlpool WFW and Maytag MHW front-loaders, repeated imbalance codes often indicate worn shock absorbers (suspension rods) rather than user error. Pull the drum forward firmly — more than 1 inch of play means replacement is needed.
You Might Also Notice
- •Loud banging during spin cycle
- •Washer walks or vibrates across the floor
- •Spin cycle never reaches full speed
- •Excessive vibration during high-speed extraction
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$185
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
W10780048 Suspension Rod Kit (front-load)W10250667 Suspension Spring Kit (top-load)
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Redistribute clothes evenly
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F0E5 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Whirlpool error code F0E5 mean?
Whirlpool error code F0E5 indicates: Load imbalance. This is a low-severity issue affecting your washer.
How do I fix Whirlpool error code F0E5?
Pause the cycle, open the door, and manually redistribute items evenly around the drum Then, Remove any single heavy item (jeans, towels) and wash separately or with similar-weight items Then, Check that the washer is level using a bubble level on top — adjust leveling feet as needed There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error F0E5?
Besides the error code on the display, common signs include: Loud banging during spin cycle; Washer walks or vibrates across the floor; Spin cycle never reaches full speed. If you notice any of these symptoms, check your washer's display panel for error code F0E5.
How much does it cost to fix Whirlpool F0E5?
Repair costs for Whirlpool F0E5 typically range from $0 to $185 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.