Want a regional phone & address? Pick your area.
Whirlpool·Washermedium severity
Whirlpool Error Code F5E1
Door switch error
Common Causes
- 1Door switch failure
Step-by-Step Troubleshooting
- 1
Open and firmly close the door, ensuring it clicks into the latch mechanism
- 2
Inspect the door strike (the hook that catches the latch) for wear, cracks, or misalignment
- 3
Use a multimeter to test the door switch for continuity when actuated — should read 0 ohms closed
- 4
Check the wiring harness from the door switch to the CCU for pinched or frayed wires at the hinge area
Pro Diagnostic Tip
On front-load Whirlpool WFW and Maytag MHW models, distinguish between F5E1 (switch) and F5E2 (lock). F5E1 means the CCU cannot detect the door is closed — usually the switch or strike. Try pressing the door firmly while starting; if the error clears temporarily, the strike is worn.
You Might Also Notice
- •Washer will not start when Start is pressed
- •Door appears closed but display does not show door-locked indicator
- •Intermittent starting failures
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$90–$200
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10545920 Door Switch AssemblyW10838613 Door Strike
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F5E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Whirlpool error code F5E1 mean?
Whirlpool error code F5E1 indicates: Door switch error. This is a medium-severity issue affecting your washer.
How do I fix Whirlpool error code F5E1?
Open and firmly close the door, ensuring it clicks into the latch mechanism Then, Inspect the door strike (the hook that catches the latch) for wear, cracks, or misalignment Then, Use a multimeter to test the door switch for continuity when actuated — should read 0 ohms closed There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error F5E1?
Besides the error code on the display, common signs include: Washer will not start when Start is pressed; Door appears closed but display does not show door-locked indicator; Intermittent starting failures. If you notice any of these symptoms, check your washer's display panel for error code F5E1.
How much does it cost to fix Whirlpool F5E1?
Repair costs for Whirlpool F5E1 typically range from $90 to $200 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.