Want a regional phone & address? Pick your area.
Midea·Washerlow severity
Midea Washer Error Code E8
Off-balance / abnormal spin distribution
Common Causes
- 1Load bunched to one side
- 2Single heavy item
- 3Washer not level
- 4Worn suspension or shock absorbers
Step-by-Step Troubleshooting
- 1
Pause the cycle and spread the laundry evenly around the drum
- 2
Add two or three towels when washing one bulky item like a comforter
- 3
Level the washer with the adjustable feet and lock the nuts
- 4
Push down on the drum — more than one bounce means the shock absorbers or springs are worn
- 5
Replace the suspension components if E8 keeps returning with balanced loads
Pro Diagnostic Tip
E8 on a genuinely balanced load means worn dampers, not user error. The bounce test is the quick discriminator — a healthy drum settles in one bounce.
You Might Also Notice
- •Loud banging during spin
- •Washer walks across the floor
- •Spin repeatedly restarts or aborts
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$0–$250
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Shock absorber / damper kitSuspension spring
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Open the door and redistribute the load evenly
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E8 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Midea error code E8 mean?
Midea error code E8 indicates: Off-balance / abnormal spin distribution. This is a low-severity issue affecting your washer.
How do I fix Midea error code E8?
Pause the cycle and spread the laundry evenly around the drum Then, Add two or three towels when washing one bulky item like a comforter Then, Level the washer with the adjustable feet and lock the nuts There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error E8?
Besides the error code on the display, common signs include: Loud banging during spin; Washer walks across the floor; Spin repeatedly restarts or aborts. If you notice any of these symptoms, check your washer's display panel for error code E8.
How much does it cost to fix Midea E8?
Repair costs for Midea E8 typically range from $0 to $250 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online