Want a regional phone & address? Pick your area.
Midea·Washerhigh severity
Midea Washer Error Code E4
Overflow — water level too high
Common Causes
- 1Inlet valve stuck open
- 2Pressure (level) sensor failed
- 3Pressure hose blocked
- 4Board level relay stuck
Flood risk. Shut the taps immediately and isolate power at the breaker if water has reached the outlet or plug.
Step-by-Step Troubleshooting
- 1
Unplug the washer and shut both supply taps immediately
- 2
Check whether water keeps entering with power off — that confirms a mechanically stuck inlet valve
- 3
Inspect the pressure sensor air hose for water, splits, or kinks
- 4
Blow gently through the pressure hose to confirm the sensor clicks
- 5
Replace the pressure sensor if the valve holds and the hose is clear
Pro Diagnostic Tip
E4 is a flood-safety code. If the drum keeps filling with the plug pulled, the inlet valve is stuck — shut the taps before doing anything else.
You Might Also Notice
- •Water over the door seal
- •Water on the floor
- •Continuous filling
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$115–$260
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Pressure (level) sensorWater inlet valvePressure sensor hose
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E4 is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Midea error code E4 mean?
Midea error code E4 indicates: Overflow — water level too high. This is a high-severity issue affecting your washer.
How do I fix Midea error code E4?
Unplug the washer and shut both supply taps immediately Then, Check whether water keeps entering with power off — that confirms a mechanically stuck inlet valve Then, Inspect the pressure sensor air hose for water, splits, or kinks There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E4?
Besides the error code on the display, common signs include: Water over the door seal; Water on the floor; Continuous filling. If you notice any of these symptoms, check your washer's display panel for error code E4.
How much does it cost to fix Midea E4?
Repair costs for Midea E4 typically range from $115 to $260 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online