Want a regional phone & address? Pick your area.
Midea·Washermedium severity
Midea Washer Error Code E3
Door lock / lid fault
Common Causes
- 1Door lock or lid switch failed
- 2Door not latched
- 3Wiring to the lock open
- 4Board lock relay fault
Step-by-Step Troubleshooting
- 1
Re-latch the door or close the lid firmly and listen for the lock to engage at start
- 2
Inspect the strike, latch, or lid-switch actuator for wear or a bent catch
- 3
Unplug the washer and test the door lock or lid switch for continuity
- 4
Check the harness from the lock to the main board for a loose or corroded connector
- 5
Replace the door lock or lid switch assembly if it reads open with the door shut
Pro Diagnostic Tip
Top-load Midea washers use a lid switch rather than a solenoid lock. A washer that fills but will not spin usually has a worn lid-switch actuator, not a board fault.
You Might Also Notice
- •Washer will not start
- •Fills but will not spin
- •Clicking at the door or lid
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$90–$210
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Door lock assemblyLid switch
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E3 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Midea error code E3 mean?
Midea error code E3 indicates: Door lock / lid fault. This is a medium-severity issue affecting your washer.
How do I fix Midea error code E3?
Re-latch the door or close the lid firmly and listen for the lock to engage at start Then, Inspect the strike, latch, or lid-switch actuator for wear or a bent catch Then, Unplug the washer and test the door lock or lid switch for continuity There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E3?
Besides the error code on the display, common signs include: Washer will not start; Fills but will not spin; Clicking at the door or lid. If you notice any of these symptoms, check your washer's display panel for error code E3.
How much does it cost to fix Midea E3?
Repair costs for Midea E3 typically range from $90 to $210 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online