Want a regional phone & address? Pick your area.
Electrolux·Washer (Kenmore)medium severity
Electrolux Error Code Ld
Long drain
Common Causes
- 1Clogged drain pump filter
- 2Kinked drain hose
- 3Drain pump obstruction
Step-by-Step Troubleshooting
- 1
Open the lower access panel and clean the drain pump filter trap
- 2
Check drain hose for kinks — ensure standpipe height is 30-96 inches
- 3
Remove pump filter and inspect impeller for coins, hairpins, or lint
- 4
If pump runs but no water exits, check for hose blockage at standpipe
Pro Diagnostic Tip
F02/F21 are older platform codes for the same drain fault; if the pump hums loudly, an object is jamming the impeller — disassemble pump housing to clear
You Might Also Notice
- •Water remains in drum after cycle
- •Musty smell from washer
- •Spin cycle incomplete
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$80–$250
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
W10876600 — Drain pump assemblyW10820048 — Drain hose
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Clean drain pump filter
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code Ld disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Electrolux error code Ld mean?
Electrolux error code Ld indicates: Long drain. This is a medium-severity issue affecting your washer (kenmore).
How do I fix Electrolux error code Ld?
Open the lower access panel and clean the drain pump filter trap Then, Check drain hose for kinks — ensure standpipe height is 30-96 inches Then, Remove pump filter and inspect impeller for coins, hairpins, or lint There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer (kenmore) has error Ld?
Besides the error code on the display, common signs include: Water remains in drum after cycle; Musty smell from washer; Spin cycle incomplete. If you notice any of these symptoms, check your washer (kenmore)'s display panel for error code Ld.
How much does it cost to fix Electrolux Ld?
Repair costs for Electrolux Ld typically range from $80 to $250 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.