Electrolux Appliance Error Codes
Complete reference guide with 28+ error codes for Electrolux appliances, including Frigidaire, Kenmore. Find your error code below, understand the cause, and learn if it's a DIY fix or needs professional repair.
Parent company: Electrolux Group | Also covers: Frigidaire, Kenmore
| Code | Description | Severity |
|---|---|---|
| SY EF Also: 5Y EF | Evaporator fan circuit failure Causes: Fan motor failure, Wiring harness issue, Control board fault | high |
| SY CF Also: 5Y CF | Communication failure Causes: Board-to-board communication fault, Wiring harness damage, Control board failure | high |
| SH | Freezer sensor shorted Causes: Sensor wire short circuit, Damaged sensor, Moisture in connector | high |
| OP | Sensor open circuit Causes: Broken sensor wire, Disconnected sensor plug, Sensor element failure | high |
| DF | Defrost circuit error Causes: Defrost heater failure, Defrost thermostat open, Control board defrost relay fault | high |
When to Call a Professional
- Error code returns after power reset
- Code is marked as high severity
- Appliance is leaking water, making unusual noises, or smells like burning
- You're not comfortable working with electrical or gas appliances
Electrolux Error Codes — FAQ
What are the most common Electrolux error codes?
The most common Electrolux error codes relate to temperature sensors, drainage issues, motor errors, and communication failures. Check our complete list above for your specific code, or call EasyBear for professional diagnosis.
How do I reset my Electrolux appliance after an error code?
For most Electrolux appliances, unplug the unit or turn off the circuit breaker for 60 seconds, then restore power. If the error code returns after reset, the underlying issue needs professional repair.
Can I fix a Electrolux error code myself?
Some Electrolux error codes indicate simple issues like unbalanced loads, clogged filters, or suds buildup that you can fix yourself. Our table above marks each code as DIY-fixable or requiring professional service. For high-severity codes, always call a certified technician.
How much does Electrolux appliance repair cost in San Francisco?
Electrolux appliance repair in the Bay Area typically costs $100-$500 depending on the issue. Simple fixes run $100-$200, while complex repairs (compressor, control board) can be $300-$600. At EasyBear, diagnosis is free when you proceed with the repair.
Does Electrolux warranty cover error code repairs?
Electrolux manufacturer warranty typically covers defects for 1-2 years from purchase. Some components (like LG linear compressors) have extended coverage. Our technicians can verify your warranty status and handle claims. Even out-of-warranty repairs are affordable with EasyBear.
Do Frigidaire and Kenmore use the same error codes as Electrolux?
Frigidaire, Kenmore are part of the Electrolux family and often share similar platforms and error code systems. However, some models may have unique codes. Our reference covers error codes for all brands in this family.