Want a regional phone & address? Pick your area.
Electrolux·Washerhigh severity
Electrolux Error Code E50
Motor failure
Common Causes
- 1Motor winding failure
- 2Inverter board issue
- 3Motor bearing seized
If a burning smell accompanies E50, unplug immediately — continued operation risks electrical short or fire from overheated motor windings
Step-by-Step Troubleshooting
- 1
Check motor winding resistance — each phase should read 2-8 ohms
- 2
Inspect inverter (motor control) board for burned components
- 3
Spin drum by hand — grinding or resistance indicates seized bearings
- 4
Check motor connector for burnt pins (high-current connection)
Pro Diagnostic Tip
On Electrolux Perfect Steam models with direct-drive motors, E50 combined with a burning smell indicates motor winding failure — do not attempt further cycles; the motor can short to ground
You Might Also Notice
- •Drum does not spin or agitate
- •Burning smell during cycle
- •Loud humming without drum movement
Parts, Cost & Difficulty
Repair Difficulty
Professional OnlyEstimated Repair Cost
$250–$550
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
137326000 — Drive motor134743500 — Motor control (inverter) board
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E50 is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Electrolux error code E50 mean?
Electrolux error code E50 indicates: Motor failure. This is a high-severity issue affecting your washer.
How do I fix Electrolux error code E50?
Check motor winding resistance — each phase should read 2-8 ohms Then, Inspect inverter (motor control) board for burned components Then, Spin drum by hand — grinding or resistance indicates seized bearings There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E50?
Besides the error code on the display, common signs include: Drum does not spin or agitate; Burning smell during cycle; Loud humming without drum movement. If you notice any of these symptoms, check your washer's display panel for error code E50.
How much does it cost to fix Electrolux E50?
Repair costs for Electrolux E50 typically range from $250 to $550 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.