Want a regional phone & address? Pick your area.
Electrolux·Dishwasherlow severity
Electrolux Dishwasher Error Code PF
Power failure
Common Causes
- 1Power outage during a cycle
- 2Tripped or shared breaker
- 3Loose power connection at the junction box
- 4Failing power relay on the main control board
Step-by-Step Troubleshooting
- 1
Press Start/Resume once — a genuine one-time outage clears with no further action
- 2
Check the dedicated dishwasher breaker and confirm it is not sharing a circuit with the disposal or microwave
- 3
Open the junction box under the unit and inspect the wire nuts for loose or heat-discolored connections
- 4
Reseat the main power connector at the control board and look for browned or arced terminals
Pro Diagnostic Tip
A one-time PF after a storm is harmless, but PF at the end of every cycle points to an intermittent supply fault — check the GFCI outlet, the shared breaker, and the board power relay, which can chatter as its contacts wear and reset the control mid-wash.
You Might Also Notice
- •Cycle resets unexpectedly partway through
- •Clock and settings reset to default
- •Unit beeps when power returns
- •Remaining cycle time is lost and must be restarted
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$90
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Power cord assemblyMain control board
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code PF disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Electrolux error code PF mean?
Electrolux error code PF indicates: Power failure. This is a low-severity issue affecting your dishwasher.
How do I fix Electrolux error code PF?
Press Start/Resume once — a genuine one-time outage clears with no further action Then, Check the dedicated dishwasher breaker and confirm it is not sharing a circuit with the disposal or microwave Then, Open the junction box under the unit and inspect the wire nuts for loose or heat-discolored connections There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my dishwasher has error PF?
Besides the error code on the display, common signs include: Cycle resets unexpectedly partway through; Clock and settings reset to default; Unit beeps when power returns. If you notice any of these symptoms, check your dishwasher's display panel for error code PF.
How much does it cost to fix Electrolux PF?
Repair costs for Electrolux PF typically range from $0 to $90 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related Electrolux Dishwasher Error Codes
Call NowAvailable 24/7 — call or textBook Online