Want a regional phone & address? Pick your area.
Amana·Dishwashermedium severity
Amana Dishwasher Error Code F6E1
Water fill fault
Common Causes
- 1Supply valve off
- 2Inlet valve failed
- 3Float stuck
Step-by-Step Troubleshooting
- 1
Open the supply valve under the sink fully — it may have been partially closed
- 2
Open the door and check if the float at the bottom of the tub is stuck in the up position — press it down
- 3
Check the supply line for kinks between the valve and the dishwasher
- 4
Test the inlet valve solenoid with a multimeter — coil should read 500-1500 ohms
Pro Diagnostic Tip
F6E1 is a fill fault on a budget Amana ADB dishwasher, and the cheapest fix comes first: a plastic float at the tub floor that has hung up on food debris tells the board the tub is already full, so lift and release it a few times before touching the valve. If the float moves freely, the inlet valve is next, and in hard-water areas it calcifies within a few years until it can no longer open. A dead-silent valve during the fill step, with no buzz, points at the solenoid rather than the float.
You Might Also Notice
- •Dishwasher will not fill with water
- •Fill step drags on far too long
- •Dishes come out dirty from too little water
- •No buzz from the valve during the fill
- •Float visibly stuck up at the tub floor
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$200
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10195049 Water Inlet ValveW10872255 Float Switch Assembly
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Open water supply valve
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F6E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Amana error code F6E1 mean?
Amana error code F6E1 indicates: Water fill fault. This is a medium-severity issue affecting your dishwasher.
How do I fix Amana error code F6E1?
Open the supply valve under the sink fully — it may have been partially closed Then, Open the door and check if the float at the bottom of the tub is stuck in the up position — press it down Then, Check the supply line for kinks between the valve and the dishwasher There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my dishwasher has error F6E1?
Besides the error code on the display, common signs include: Dishwasher will not fill with water; Fill step drags on far too long; Dishes come out dirty from too little water. If you notice any of these symptoms, check your dishwasher's display panel for error code F6E1.
How much does it cost to fix Amana F6E1?
Repair costs for Amana F6E1 typically range from $75 to $200 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online