Want a regional phone & address? Pick your area.
Amana·Dishwasherlow severity
Amana Dishwasher Error Code F2E2
User interface button stuck
Common Causes
- 1A touchpad button stuck by grease or spill film
- 2Moisture bridging the membrane contacts
- 3Warped control overlay pressing a key
- 4Failed touchpad membrane
Step-by-Step Troubleshooting
- 1
Press each button on the Amana ADB console door in turn to release a key that reads as continuously held
- 2
Wipe the touch panel with a barely damp cloth to clear kitchen grease or a dried spill bridging the contacts
- 3
Dry the top edge of the door where steam escapes and wicks into the control, a common cause on a dishwasher membrane
- 4
If no button is stuck and the fault stays, the touchpad membrane has failed and the control panel needs replacing
Pro Diagnostic Tip
The Amana control blocks a start when it reads a key as held too long, and on a dishwasher the usual cause is steam wicking into the top-mounted touchpad rather than a physical jam. Dry and clean the panel first, and check the door vents away from the console before ordering a replacement touchpad.
You Might Also Notice
- •The dishwasher will not start
- •A button feels stuck or unresponsive
- •The panel selects options on its own
- •Lights flash without a command
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$220
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Touchpad / control panel
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Wipe the touch panel and free any held button
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F2E2 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Amana error code F2E2 mean?
Amana error code F2E2 indicates: User interface button stuck. This is a low-severity issue affecting your dishwasher.
How do I fix Amana error code F2E2?
Press each button on the Amana ADB console door in turn to release a key that reads as continuously held Then, Wipe the touch panel with a barely damp cloth to clear kitchen grease or a dried spill bridging the contacts Then, Dry the top edge of the door where steam escapes and wicks into the control, a common cause on a dishwasher membrane There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my dishwasher has error F2E2?
Besides the error code on the display, common signs include: The dishwasher will not start; A button feels stuck or unresponsive; The panel selects options on its own. If you notice any of these symptoms, check your dishwasher's display panel for error code F2E2.
How much does it cost to fix Amana F2E2?
Repair costs for Amana F2E2 typically range from $0 to $220 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online