Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

Replace the heating element in your LG dishwasher to resolve the HE error code and cold wash cycles. Covers access, testing, and installation steps.

Replace the drain valve/solenoid on your LG dishwasher to fix OE errors and water not draining. Step-by-step access, testing, and installation.

An OE code and no drain on an LG dishwasher usually means the drain pump (4681EA2001T) has burned out. Confirm with a multimeter, then swap it under the kick plate.

Deep clean an LG dishwasher to prevent the OE drain error: the pull-up filter, QuadWash spray arms with their reverse-thread nut, the door gasket, the TrueSteam nozzle, and a vinegar cycle.

Fix no-start or no-spin on a KitchenAid top-load washer by replacing the lid switch or motorized lock. Covers console removal, the mechanical vs motorized types, and a lock test.
Replace the shift actuator (W10913953) on a KitchenAid VMW top-load washer that agitates but will not spin: tilt the machine, align the linkage arm on the splutch cam, and test.

Clear an LG dishwasher IE error by replacing the water inlet valve (part 5220FR2006H). Includes the free screen-clean that fixes many IE codes, electrical testing, and a full removal walkthrough.

Intermediate 30-45 minute guide to replacing the dual water inlet valve on a KitchenAid washing machine: shutting off water, removing the old valve, and reconnecting hot and cold correctly.

When a KitchenAid top-loader will not agitate or spin and the motor is dead silent, the drive motor (part W10623547) has failed. Here is the bottom-access replacement.

An LG dishwasher OE error is a drain failure — usually a clogged filter, a kinked hose, or a failed drain pump (4681EA2001T). Work the drain path cheapest-first.

An LG dishwasher wash motor throwing LE or nE errors can be a jammed impeller, a bad connector, a failed start capacitor on older units, or an inverter board on Direct Drive models. Here is how to tell them apart.

Eliminate mold, mildew, and musty odors from your KitchenAid front-load or top-load washer. Targets the door boot seal, outer tub, dispenser housing.

Replace the water inlet valve on your KitchenAid front-load washer. Covers brand-specific part numbers, diagnostics, and the shared Whirlpool platform...

Replace the drive belt on KitchenAid VMW (Vertical Modular Washer) top-load models. Covers belt routing around the splutch pulley and motor, using the same...

A monthly Affresh cycle, a fortnightly dispenser wash and a six-monthly suspension check will add years to a KitchenAid washer — plus the detergent mistake that quietly wrecks the ProWash sensor.

A KitchenAid washer stores its last five fault codes, and the oldest is usually the real cause. Enter diagnostic mode, then work the code — lid lock, fill, drain or motor.

The full teardown for a direct-drive top-loader: cabinet off, motor clips released, old forks pulled, new three-piece coupler meshed. Plus the VMW check to do before you order.

Diagnose and replace failed electrolytic capacitors on a KitchenAid induction cooktop inverter board to clear zone error codes and restore power.

Swap worn drip pans and plug-in coil elements on a KitchenAid coil-top range to restore even heating and appearance, in about 15 minutes with no tools.

Replace a burned burner element receptacle block on a KitchenAid coil-top range when an element sparks, heats intermittently, or will not heat.

Swap a failed plug-in coil burner element on a KitchenAid coil-top range, match the right diameter and wattage, and break the new element in.

Replace a failed lower bake element in a KitchenAid oven when the bottom will not brown, baking runs slow, or the oven never reaches temperature.

Replace a failed infinite switch behind a KitchenAid electric cooktop when a burner will not regulate heat or stays locked on full power.

Replace the knob-style oven mode selector switch on a KitchenAid range that routes power to the bake, broil, and convection circuits.

Step-by-step disassembly guide for KitchenAid top-load and front-load washers. Access the motor, pump, control board, tub, and suspension system using the...

Step-by-step guide to deep-cleaning your KitchenAid washer including the ProWash sensor array, satin-finish drum, dispenser, and door boot seal.

Replace a failed convection fan motor on a KitchenAid range: confirm the fault, pull the interior rear panel and bow-tie element, remove the fan blade, unbolt the motor from behind, and test.

Replace the oven door gasket on a KitchenAid range to stop heat loss. Covers clip-mounted vs channel-mounted gaskets, cleaning the frame, corner slack, the paper seal test, and break-in.

Replace a failed oven temperature sensor (RTD probe) on a KitchenAid range to fix overheating, under-heating, or F3E0/F3E1 codes. Includes resistance testing and calibration.

The five KitchenAid washer repairs that cover most service calls — motor coupler, lid switch, inlet valve, drain pump, and shift actuator — with part numbers and diagnostic-mode tests.
Let our professional technicians help. Same-day service available.