The short answer
Sort the sound first, because on a gas range the sounds mean very different things. Clicking that stops once the burner lights is the igniter doing its job; clicking that continues after lighting is a burner cap out of position or a wet igniter. A roaring or whistling flame points at the air shutter or the gas pressure and belongs to a technician.
Causes, ranked for this Samsung gas stove
- Burner cap out of position or misaligned — Why: The cap has to sit squarely on its base for the flame to spread evenly, and one knocked out of place after cleaning causes both continued clicking and popping.
- Moisture or spillage in the igniter — Why: A wet igniter keeps sparking after the burner lights because the control still sees no confirmed flame, and it clears as the area dries.
- Burner ports partly blocked by spillage — Why: Blocked ports make the flame uneven and noisy, and they are cleared with a pin and a brush rather than any part.
- Air shutter or gas pressure incorrect — Why: A roaring or lifting flame usually means the air-to-gas mixture is wrong, which needs a technician and is not adjustable by an owner on most ranges.
- Wrong orifice for the fuel supplied — Why: A range converted between natural gas and propane, or never converted when it should have been, burns noisily and incorrectly — rare but serious.
What to check, in order
- stop and use your nose before anything else: if you smell gas, follow the evacuation instruction below. — Because: no noise diagnosis matters beside a possible leak, and this is the only step that must come first.
- note whether the clicking stops when the burner lights. — Because: that single observation separates a normal igniter from a genuine fault.
- lift each burner cap and reseat it squarely on its base. — Because: a misplaced cap is the top-ranked cause and it is corrected in seconds.
- look at the flame colour and shape on each burner. — Because: a lifting, roaring or yellow flame points at mixture or pressure, which is where owner diagnosis ends.
Checks you can safely do yourself
- If there is any smell of gas, stop immediately and follow the evacuation instruction below rather than continuing with any check. — Tools: none — Time: immediately
- With the range cool and off, lift each burner cap, check it and its base for spillage, and reseat it squarely. — Tools: a cloth — Time: several minutes
- Clear the burner ports with a pin and a soft brush, taking care not to enlarge any port. — Tools: a pin and a soft brush — Time: several minutes
- Dry the igniter area thoroughly after any spill or cleaning, and allow time before trying the burner again. — Tools: a dry cloth — Time: several minutes
- Light each burner and look at the flame, noting any that roars, lifts off the ports or burns yellow. Stop here: air shutters, orifices and pressure are technician work. — Tools: none — Time: several minutes
Before you open anything
Safety
gas-smell-evacuate unplug-before-service
A gas appliance making an unfamiliar noise deserves caution rather than curiosity. Never enlarge a burner port, never adjust an air shutter or orifice yourself, and never attempt to test for a leak with a flame. If a burner will not light and gas continues to flow, turn it off and let the area clear before trying again.
Where the owner fix ends
Reseating caps, clearing ports and drying an igniter are owner work. Call a technician for a roaring or lifting flame, a whistle that changes with the setting, a yellow flame, or any suspicion that the range is set for the wrong fuel: all of these are combustion faults and they are adjusted with instruments, not by ear.
Nearest pages of the same kind
Generalized information — what this page does not cover
family model
This page is generalized information about Samsung gas ranges and cooktops and does not separate the sealed-burner families, the models with different burner counts, or units converted between natural gas and propane, all of which affect the sounds described. No family-level or model-level page exists in this reference yet; when one is published it will be linked here.
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
