In brief
A trip during a hot cycle typically means the heating element has failed to earth, and that is not an homeowner repair. The observations below are safe; the repairs are not. On this kind of cabinet this is a contract-manufacturer label: the chassis is a catalogue design sold to many buyers, dressed in a different fascia for each.
What the owner sees
- Lights in the room dim when the machine starts — Evidence of a heavy load on a marginal circuit, which is worth reporting to an electrician.
- NEAR MISS — the machine simply will not start — A dead machine with nothing tripping is a supply question instead of a safety one.
- It trips partway through a hot wash only — The signature of a heating element leaking to earth once it warms.
- The breaker or RCD trips when the machine is plugged in — A fault to earth that is present without the machine even running.
Causes, ranked for this brand
- Heating element failed to earth — Ranked first: An element that has cracked or corroded conducts to earth once it heats, which is why the trip happens partway through a hot cycle instead of at the start. It sits at the top here since this is a contract-manufacturer label: the chassis is a catalogue design sold to many buyers, dressed in a different fascia for each.
- Water reaching wiring or a connector — Second: A leak that has been running for a while eventually finds a terminal, and the trip then arrives with no warning at all.
- Damaged cord, plug or socket — Third: A cord crushed behind a machine or a socket that has been running warm creates intermittent faults and scorching.
Working through it
- Check whether the machine has been leaking — A recent leak plus a new electrical fault is very unlikely to be a coincidence.
- Check both taps are fully open and the hoses run without kinks — A restricted fill lengthens or stalls cycles and reads as a fault in the machine itself.
- Note exactly when the trip happens — At plug-in, during heating, or at the start of the spin — each points at a different circuit, and this is the most valuable thing an homeowner can record.
Owner-side steps
- Move anything valuable or wet away from the machine — If it has also been leaking, deal with the water before it reaches anything else electrical.
Tools: towelsAbout 15 min
- STOP — do not reset the breaker repeatedly to test it — Repeated resetting of a faulted circuit is a fire risk, and the protective device is doing its job.
- Record the pattern in writing — When it trips, on which programmes, and what else was running at the time.
Tools: notepadAbout 10 min
Before you open anything
Safety
Switch off the breaker or pull the plug before a panel comes off, and turn the inlet valves off before a fitting is loosened. A capacitor can hold a charge with everything dark, and standing water plus mains voltage is the one combination this appliance class puts in the same box. If the floor is already wet, deal with the breaker before you step in it.
When to book a visit
Book right away where there is scorching at the plug or socket, since the fault has been developing and the supply side is involved. Call at once where water and electricity are meeting, whatever else the diagnosis might eventually be.
Related pages of the same kind
What this page does not cover
This is generalized information for the Cixi Jiaxiong Electrical Appliance Co., Ltd. washing machine class. It does not cover any one family, chassis or model year, and it does not carry part numbers, wiring identification or factory service codes; those live on the specific pages, and where such a page exists for your unit it is linked from here and takes precedence over what you read above. What is deliberately absent: wiring colours, fastener torques and part numbers, all of which change between families and belong on the page for that family. It leaves commercial and outdoor-rated variants aside; those run different duty cycles and fail in a different order.
Where to go next
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
