What this family is
This page covers the DHP dryers as one platform: the models carrying that prefix share a drum support, an airflow path and a control arrangement, and almost every fault on the line traces back to one of those three. Name the symptom from the list, then follow the link to the article that covers it.
What goes wrong on these models
- The drum turns but the load stays damp — A perfectly normal tumble with no heat, or loads taking two or three times as long as they used to. On this platform the vent run is the first suspect and the element is close to the last. Covered in full on "Blomberg DHP dryer not heating".
- The programme ends before it should — Automatic cycles ending early while timed cycles run through, which points straight at the moisture sensor bars. Covered in full on "Blomberg DHP dryer stopping mid-cycle".
- Noise the machine did not make before — Scraping or rubbing through the whole cycle, which points at the drum supports rather than at the motor. Covered in full on "Blomberg DHP dryer making noise".
- The machine will not start at all — Nothing when start is pressed, or a hum with no movement. On an electric machine the supply is checked first. Covered in full on "Blomberg DHP dryer not starting".
Fault classes, most reported first
- No heat, or loads that will not dry — The most reported fault on this family by a clear margin, and the one with a safety dimension as well as a performance one.
- Cycles cut short with the load still damp — Second by frequency here, and a good proportion resolve with a cloth and some alcohol on the sensor bars.
- A new noise from the drum or the cabinet — Regularly reported here, and the cheap causes outnumber the expensive ones.
- Nothing happens when start is pressed — Least frequent of the four on these models, and often the second symptom of an airflow problem that started weeks earlier.
Which models this profile covers
Reference| Family key | Appliance | How to identify it | Faults covered here |
|---|---|---|---|
| blomberg:dryer:dhp | Dryer | The DHP prefix on the rating-plate model number | The drum turns but the load stays damp · The cycle stops before the load is dry · A new noise from the drum or the cabinet · The machine will not start at all |
Fault classes on this family — reported ordering, no measured shares
General guidance| Problem class | Where it is covered | Owner-fixable on these models? |
|---|---|---|
| The drum turns but the load stays damp | family page | partly |
| The cycle stops before the load is dry | family page | sometimes |
| A new noise from the drum or the cabinet | family page | partly |
| The machine will not start at all | family page | sometimes |
Before any check on these models
Safety
Unplug the dryer or switch off its breaker before removing any panel or reaching into the lint path. On a gas machine, if you ever smell gas, do not switch anything on or off, leave the building, and call the gas utility emergency line from outside.
What is owner work on this family
On these models the owner-side list ends where the cabinet opens. Airflow work, sensor cleaning and supply checks are yours; thermostats, fuses, elements and igniters are not.
Other families of this brand and appliance
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
