Amana Washer: Will Not Drain
The fault is in front of you, and the useful question is which cause is likeliest on this brand. On a Amana washer that will not drain, the finding that comes up most often is a mechanical wear part rather than an electronic one, followed by a blocked pump filter or coin trap. A washer that finishes with water in the drum has a blocked drain path far more often than a failed pump, and the pump filter is where most of those blockages sit. That first step is yours to make and it costs nothing; the causes below it stop being owner work quickly.
What you are seeing
- the drum full of water at the end of a cycle, with the machine stopped or reporting a fault
- a straining or buzzing at the drain step instead of the usual water rush
- clothes left soaking wet because the machine never reached its spin
- Not this fault: If the machine drains but never spins, the fault is in the spin circuit rather than in drainage
- Body: What you are seeing: the drum full of water at the end of a cycle, with the machine stopped or reporting a fault; a straining or buzzing at the drain step instead of the usual water rush; clothes left soaking wet because the machine never reached its spin. If the machine drains but never spins, the fault is in the spin circuit rather than in drainage.
Ranked causes on a Amana washer
- A mechanical wear part rather than an electronic one — Tag: mechanical — Why: It leads here because this is the value build of a shared platform, with fewer sensors and more plain mechanism, which no other badge presents. — Presentation:
- A blocked pump filter or coin trap — Tag: filter — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: Coins, hair grips, buttons and lint packed into the filter chamber behind the lower access panel.
- A kinked, crushed or blocked drain hose — Tag: drain — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A hose bent hard behind the machine, or a hose pushed too far down the standpipe so it siphons and blocks.
- A blocked household standpipe or trap — Tag: drain — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: Water backing up out of the standpipe when the machine drains, which is a plumbing symptom rather than an appliance one.
- Body: Ranked for a Amana washer — the order is the point. First: a mechanical wear part rather than an electronic one. It leads here because this is the value build of a shared platform, with fewer sensors and more plain mechanism, which no other badge presents. Second: a blocked pump filter or coin trap. It sits at this position because the causes above it are more common, cheaper to check, or both. Third: a kinked, crushed or blocked drain hose. It sits at this position because the causes above it are more common, cheaper to check, or both. Fourth: a blocked household standpipe or trap. It sits at this position because the causes above it are more common, cheaper to check, or both.
What to check, in order
- A mechanical wear part rather than an electronic one — Reason: It is first because it exists on this platform and not on the others, so nothing else you check can rule it out for you.
- A blocked pump filter or coin trap — Reason: It comes second because a mechanical wear part rather than an electronic one either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
- A kinked, crushed or blocked drain hose — Reason: It comes third because a blocked pump filter or coin trap either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
- Body: The order below follows the ranking: cheapest and likeliest first. There is a standing rule on this platform: check the mechanical and thermal parts before you suspect electronics — an Amana has far less electronics than its Whirlpool siblings. First, a mechanical wear part rather than an electronic one. It is first because it exists on this platform and not on the others, so nothing else you check can rule it out for you. Second, a blocked pump filter or coin trap. It comes second because a mechanical wear part rather than an electronic one either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports. Third, a kinked, crushed or blocked drain hose. It comes third because a blocked pump filter or coin trap either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Checks you can make safely
- Work the moving parts by hand with the machine unplugged, feeling for play, drag and roughness before any board is considered — Tools: nothing — Time: a quarter of an hour — Targets: A mechanical wear part rather than an electronic one
- Open the lower access panel, lay towels, drain the machine through the small hose if it has one, then unscrew the filter and clear it completely — Tools: towels, a shallow tray, a flat screwdriver for the panel — Time: twenty minutes to half an hour — Targets: A blocked pump filter or coin trap
- Pull the machine forward gently, free any bend, and confirm the hose enters the standpipe only a short way rather than being pushed deep — Tools: a torch, help to move the machine — Time: a quarter of an hour — Targets: A kinked, crushed or blocked drain hose
- Body: The checks a homeowner can safely make, in the order that eliminates most for least effort. Step one: Work the moving parts by hand with the machine unplugged, feeling for play, drag and roughness before any board is considered. Tools: nothing. Allow a quarter of an hour. Step two: Open the lower access panel, lay towels, drain the machine through the small hose if it has one, then unscrew the filter and clear it completely. Tools: towels, a shallow tray, a flat screwdriver for the panel. Allow twenty minutes to half an hour. Step three: Pull the machine forward gently, free any bend, and confirm the hose enters the standpipe only a short way rather than being pushed deep. Tools: a torch, help to move the machine. Allow a quarter of an hour. Stop at the first step that would put a meter on live terminals or open a sealed system — that is where owner work ends.
Before you touch anything
Safety
A drum full of water is heavy and the water can be hot. Switch the breaker off before opening the lower panel, drain into a shallow tray rather than letting it flood the floor, and wear gloves — underwires and glass fragments live in pump filters. One thing to keep in mind on this platform: fewer sensors, so faults present mechanically rather than as a code — that changes where your hands go. electrical water Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off.
When to stop and call
Call a technician if any of these is true: the filter and the hose are clear and the pump still makes no sound; the standpipe backs up, which is a plumbing job rather than an appliance one. Above that line the next measurement is on live terminals or inside a sealed system. the filter and the hose are clear and the pump still makes no sound the standpipe backs up, which is a plumbing job rather than an appliance one
Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.
General guidance- Unplug before service — Manufacturer service manuals, universally; OSHA 1910.147 for the principle., fetched 2026-09-05
Nearest pages of the same kind — Nearest pages of the same kind: kenmore-washer-control-fault; hisense-washer-control-fault; hisense-washer-control-fault-2.
What this page does not cover
Generalized information: this covers the Amana washer as a platform, not one model. It carries no model-specific codes, service sequences or part numbers. Other faults on this same machine: amana-washer-abnormal-noise, amana-washer-control-fault, amana-washer-water-leak. The same fault on other platforms, where it ranks differently: whirlpool-washer-drainage-failure, ge-washer-drainage-failure. Read the model number from the appliance tag before ordering any part — that is the axis this page does not resolve.
Links down: - [Amana Washer: Abnormal Noise or Vibration](/blog/amana-washer-abnormal-noise) - [Amana Washer: Controls, Display or Error Code](/blog/amana-washer-control-fault) - [Amana Washer: Water Leak](/blog/amana-washer-water-leak)
Links across: - [Whirlpool Washer: Will Not Drain](/blog/whirlpool-washer-drainage-failure) - [GE Washer: Will Not Drain](/blog/ge-washer-drainage-failure)
Related pages — Where a reader on this page usually goes next — other faults on the same Amana washer: amana-washer-abnormal-noise; amana-washer-control-fault; amana-washer-water-leak, and the same fault on another platform: whirlpool-washer-drainage-failure; ge-washer-drainage-failure.
- Amana Washer: Abnormal Noise or Vibration
- Amana Washer: Controls, Display or Error Code
- Amana Washer: Water Leak
- Whirlpool Washer: Will Not Drain
- GE Washer: Will Not Drain
- Amana Washer: Abnormal Noise or Vibration
- Amana Washer: Controls, Display or Error Code
- Amana Washer: Water Leak
- Whirlpool Washer: Will Not Drain
- GE Washer: Will Not Drain
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
