Amana Refrigerator: No Ice
The fault is in front of you, and the useful question is which cause is likeliest on this brand. On a Amana refrigerator that has stopped making ice, the finding that comes up most often is a mechanical wear part rather than an electronic one, followed by the feeler arm or the on-off switch left off. An ice maker is a small machine with a water supply, a freezing cycle and an ejection mechanism, and the fault is nearly always in the water supply or in the freezer temperature rather than in the ice maker itself. That first step is yours to make and it costs nothing; the causes below it stop being owner work quickly.
What you are seeing
- an empty ice bin with the ice maker switched on
- ice cubes that are hollow, small or misshapen
- a solid block of ice fused in the bin
- Not this fault: If neither water nor ice is available, the supply is the fault rather than the ice maker
- Body: What you are seeing: an empty ice bin with the ice maker switched on; ice cubes that are hollow, small or misshapen; a solid block of ice fused in the bin. If neither water nor ice is available, the supply is the fault rather than the ice maker.
Ranked causes on a Amana refrigerator
- A mechanical wear part rather than an electronic one — Tag: mechanical — Why: It leads here because this is the value build of a shared platform, with fewer sensors and more plain mechanism — so the parts you can see fail before the ones you cannot, which no other badge presents. — Presentation:
- The feeler arm or the on-off switch left off — Tag: usage — Why: It ranks high here because Amana leaves more of the outcome to how the machine is loaded and dosed. — Presentation: An ice maker in perfect condition with its arm raised or its switch off.
- A frozen or closed water supply line — Tag: water-inlet — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: No water arriving at all, often after the household supply was turned off or the machine was moved.
- A frozen fill tube at the ice maker — Tag: water-inlet — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A plug of ice in the small tube that feeds the mould, with an ice maker that cycles and produces nothing.
- Body: Ranked for a Amana refrigerator — the order is the point. First: a mechanical wear part rather than an electronic one. It leads here because this is the value build of a shared platform, with fewer sensors and more plain mechanism — so the parts you can see fail before the ones you cannot, which no other badge presents. Second: the feeler arm or the on-off switch left off. It ranks high here because Amana leaves more of the outcome to how the machine is loaded and dosed. Third: a frozen or closed water supply line. It sits at this position because the causes above it are more common, cheaper to check, or both. Fourth: a frozen fill tube at the ice maker. It sits at this position because the causes above it are more common, cheaper to check, or both.
What to check, in order
- A mechanical wear part rather than an electronic one — Reason: It is first because it exists on this platform and not on the others, so nothing else you check can rule it out for you.
- The feeler arm or the on-off switch left off — Reason: It comes second because a mechanical wear part rather than an electronic one either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
- A frozen or closed water supply line — Reason: It comes third because the feeler arm or the on-off switch left off either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
- Body: The order below follows the ranking: cheapest and likeliest first. There is a standing rule on this platform: check the mechanical and thermal parts before you suspect electronics — an Amana has far less electronics than its Whirlpool siblings. First, a mechanical wear part rather than an electronic one. It is first because it exists on this platform and not on the others, so nothing else you check can rule it out for you. Second, the feeler arm or the on-off switch left off. It comes second because a mechanical wear part rather than an electronic one either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports. Third, a frozen or closed water supply line. It comes third because the feeler arm or the on-off switch left off either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Checks you can make safely
- Work the moving parts by hand with the machine unplugged, feeling for play, drag and roughness before any board is considered — Tools: nothing — Time: a quarter of an hour — Targets: A mechanical wear part rather than an electronic one
- Lower the feeler arm or switch the ice maker on, and confirm the bin is seated fully home so the arm can drop — Tools: nothing — Time: a few minutes — Targets: The feeler arm or the on-off switch left off
- Confirm the shut-off valve behind or beneath the machine is open, and dispense water at the door if the machine has a dispenser — Tools: a torch — Time: a quarter of an hour — Targets: A frozen or closed water supply line
- Body: The checks a homeowner can safely make, in the order that eliminates most for least effort. Step one: Work the moving parts by hand with the machine unplugged, feeling for play, drag and roughness before any board is considered. Tools: nothing. Allow a quarter of an hour. Step two: Lower the feeler arm or switch the ice maker on, and confirm the bin is seated fully home so the arm can drop. Tools: nothing. Allow a few minutes. Step three: Confirm the shut-off valve behind or beneath the machine is open, and dispense water at the door if the machine has a dispenser. Tools: a torch. Allow a quarter of an hour. Stop at the first step that would put a meter on live terminals or open a sealed system — that is where owner work ends.
Before you touch anything
Safety
Unplug the machine before reaching into an ice maker — the ejector can cycle at any time and the heater in the mould is live. Never use a knife or a screwdriver to chip ice out of a mould or a chute; you will puncture something that is expensive to replace. One thing to keep in mind on this platform: fewer sensors, so faults present mechanically rather than as a code — that changes where your hands go. electrical water Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off.
When to stop and call
Call a technician if any of these is true: the supply is open, the filter is new and the fill tube is clear with no fill happening; the ice maker never cycles at all; the freezer will not hold a temperature cold enough to freeze a mould. Above that line the next measurement is on live terminals or inside a sealed system. the supply is open, the filter is new and the fill tube is clear with no fill happening the ice maker never cycles at all the freezer will not hold a temperature cold enough to freeze a mould
Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.
General guidance- Unplug before service — Manufacturer service manuals, universally; OSHA 1910.147 for the principle., fetched 2026-09-05
Nearest pages of the same kind — Nearest pages of the same kind: ge-refrigerator-ice-production; ge-refrigerator-control-fault; lg-refrigerator-cooling-failure.
What this page does not cover
Generalized information: this covers the Amana refrigerator as a platform, not one model. It carries no model-specific codes, service sequences or part numbers. Readings of this same fault written from a different starting point: amana-refrigerator-ice-production-2. Other faults on this same machine: amana-refrigerator-cooling-failure, amana-refrigerator-cooling-failure-2, amana-refrigerator-abnormal-noise. The same fault on other platforms, where it ranks differently: ge-refrigerator-ice-production, lg-refrigerator-ice-production. Read the model number from the appliance tag before ordering any part — that is the axis this page does not resolve. AMANA Refrigerator: Not Cooling or Not Freezing — Slug: amana-refrigerator-cooling-failure Amana Refrigerator: Not Cooling or Not Freezing — Slug: amana-refrigerator-cooling-failure-2 AMANA Refrigerator: Abnormal Noise or Vibration — Slug: amana-refrigerator-abnormal-noise
Links across: - [GE Refrigerator: Ice Maker Fault](/blog/ge-refrigerator-ice-production) - [LG Refrigerator: Ice Maker Fault](/blog/lg-refrigerator-ice-production)
Related pages — Where a reader on this page usually goes next — other faults on the same Amana refrigerator: amana-refrigerator-cooling-failure; amana-refrigerator-cooling-failure-2; amana-refrigerator-abnormal-noise, and the same fault on another platform: ge-refrigerator-ice-production; lg-refrigerator-ice-production.
- AMANA Refrigerator: Not Cooling or Not Freezing
- Amana Refrigerator: Not Cooling or Not Freezing
- AMANA Refrigerator: Abnormal Noise or Vibration
- GE Refrigerator: Ice Maker Fault
- LG Refrigerator: Ice Maker Fault
- AMANA Refrigerator: Not Cooling or Not Freezing
- Amana Refrigerator: Not Cooling or Not Freezing
- AMANA Refrigerator: Abnormal Noise or Vibration
- GE Refrigerator: Ice Maker Fault
- LG Refrigerator: Ice Maker Fault
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
