What E13 means
E13 means the oven did not preheat correctly, and the brand points at the appliance control board or its wiring. Check the simple things first, the door, the breaker and anything blocking the cavity, then reset once and try again; if the preheat fails a second time, the control or its connections need a technician.
Error codes
Reference| Code | Meaning |
|---|---|
| E13 | The oven did not pre-heat correctly. There may a problem with the Appliance Control Board or the associated wiring. |
What you observe
- Preheat takes far too long, then the code appears — The control gave up waiting for the temperature.
- The oven barely warms — The control may not be switching the heat on fully.
- The code appears with a large or cold load — A heavy load slows the preheat.
- NEAR MISS: the oven preheats but bakes unevenly — That is a sensor or element question, not a failed preheat.
What usually sets this code
- Appliance control board fault — The most common cause once the simple checks are done: the board that runs the preheat fails to switch the heat on properly.
- Wiring or connector to the heating circuit — Second: a loose or heat-damaged connector cuts power to the heat during preheat.
- Door open or not sealing during preheat — Third: an open door or a gap lets heat escape faster than the oven can build it.
- Supply problem — Least likely: a breaker half tripped or a weak supply limits the heat available.
Check in this order
- Check the door is closed and sealing — A gap at the gasket slows the preheat.
- Check the breaker — Fully on; a half-tripped breaker limits the heat.
- Empty the cavity — Preheat with nothing inside for a fair test.
- Power-down reset and retry — Breaker off for a minute, then preheat again.
Clearing the code, then checking
- Close and check the door — Close the door fully and look for a gap or a damaged gasket.
About 2 min
- Check the breaker — Make sure the oven’s breaker is fully on and none of its handles has tripped.
Tools: flashlightAbout 3 min
- Power-down reset — Switch off the breaker for a minute, then restore power.
About 2 min
- STOP here if the next check needs a panel off — Anything behind a panel is a power-off technician job, and the tests that follow it are made on live circuits.
Safety for this oven
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. Ranges and wall ovens are hard-wired or plugged in behind the unit, so the breaker is the safer way to cut power. A range that has been pulled out goes back onto its anti-tip bracket before it is used again.
When to call a technician
Call when the preheat fails again after the door, the breaker and a reset have been checked. The appliance control board and the wiring to the heating circuit are tested behind panels with the power off.
Other Amana oven codes close to this one
Which models this reading covers
Generalized information for Amana ranges and wall ovens whose electronic control reports codes in this form. It is not a reading for Amana models with knob-only controls, Amana cooktops sold as separate units, which keep their own list, or sister brands on the same platform, whose lists can read differently. The details that change inside the line, such as wiring colours, part numbers and connector locations, belong on model pages, and none is published for E13 yet.
All Amana oven codes
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
