What the display is telling you
E11 means the gas sensor reported a problem to the control board: there may be a fault in the gas sensor or in the wiring that connects it. The code reports a sensor fault, not a gas reading; reset once at the breaker, and book a technician if it returns. If you ever smell gas, that is an emergency separate from any code.
Error codes
Reference| Code | Meaning |
|---|---|
| E11 | The Gas Sensor reported a problem to the control board. There may be a problem with the Gas Sensor or the associated wiring. |
What you notice alongside E11
- The code appears at power-up — The control checks the sensor circuit when power arrives.
- A function stops or will not start — The control may refuse a function that relies on the sensor.
- The code returns after a reset — A real sensor or wiring fault.
- NEAR MISS: a smell of gas — That is not this code; leave the building and call from outside.
What triggers E11, ranked
- Gas sensor failed — The most common cause: the sensor itself stops reporting correctly with age or heat.
- Wiring or connector to the sensor — Second: a disturbed or heat-damaged sensor connector.
- Moisture or residue at the sensor — Third: cleaner or condensation reaching the sensor area upsets its reading.
- Control fault — Last: the control, once the sensor and wiring test good.
Diagnostic order
- If you smell gas, leave first — Do not switch anything on or off; call from outside.
- Power-down reset — Breaker off for a minute, then on.
- Note when the code appears — At power-up, or with a particular function.
- Recall cleaning or repairs — Moisture or a disturbed connector are both common.
Reset and owner-safe checks
- Power-down reset — Switch off the breaker for a minute, then restore power.
About 2 min
- Avoid the function that triggers it — If one function brings the code back, use others until the repair.
About 1 min
- Record the code — Note the code exactly, when it appeared and what was running.
Tools: notepad or phoneAbout 2 min
- STOP before opening panels — The sensor and its wiring sit behind panels; testing them is technician work.
Safety first
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. With the breaker off, press a key to confirm the display stays dark before you touch anything behind a panel. If you smell gas, do not switch anything on or off, leave the building, and call the gas utility or emergency services from outside.
When a reset is not enough
Call when the code returns after a reset. If you smell gas at any time, leave the building and call the gas utility or emergency services from outside; that comes before any appliance repair.
Neighbouring codes
Scope of this reading
The reading above covers Amana ranges and wall ovens whose electronic control reports codes in this form. It does not cover Amana models with knob-only controls, Amana cooktops sold as separate units, which keep their own list, or sister brands on the same platform, whose lists can read differently. A model-specific page for E11, where one exists, is the more specific answer; none exists yet, so check the use-and-care guide for your exact model before ordering any part.
Browse the code list
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
