What this family is
The TW refrigerator family covers six listings, TW35 through TW115, and the table below is the whole of what the spine records about them. What dominates on this platform is cooling and temperature faults, with noise and vibration behind it.
What goes wrong on these models
- Cooling and temperature faults — the outside of the cabinet near the compartment is warm to the hand — See: Alpicool TW Refrigerator: Not Cooling or Not Freezing.
- Noise and vibration — a buzz or hum that changes when the unit is nudged — See: Alpicool TW Refrigerator: Abnormal Noise or Vibration.
- Ice-making faults — frost coats the plate but the contents stay soft — See: Alpicool TW Refrigerator: Ice Maker Fault.
- Leaks and water on the floor — the floor is wet only after the unit has been switched off for a while — See: Alpicool TW Refrigerator: Water Leak.
Problem classes in frequency order
- 1. Cooling and temperature faults — The usual answer in this class is supply voltage and the battery-protection cutoff. The TW ladder runs from TW35 to TW115, and the draw at the top of it is what exposes a marginal supply first.
- 2. Noise and vibration — On this platform it is the surface underneath it, more often than anything else.
- 3. Ice-making faults — On these models the class is led by the set point and the operating mode.
- 4. Leaks and water on the floor — Led here by meltwater collecting in the cabinet floor.
Models in the TW family — The listings this family covers; it is a family page, not a model page.
Reference| Model number | Family key |
|---|---|
| TW115 | alpicool:refrigerator:tw |
| TW35 | alpicool:refrigerator:tw |
| TW45 | alpicool:refrigerator:tw |
| TW55 | alpicool:refrigerator:tw |
| TW75 | alpicool:refrigerator:tw |
| TW95 | alpicool:refrigerator:tw |
Problem classes on this family — Ordering only: no snapshot behind this family carries a counted denominator, so no share is printed.
General guidance| Problem class | Relative frequency on this family |
|---|---|
| Cooling and temperature faults | first by report |
| Noise and vibration | second |
| Ice-making faults | third |
| Leaks and water on the floor | fourth |
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. Never cut into the sealed refrigerant circuit, and never chip ice off the plate with a blade, because the tubing behind it is thin-walled.
Owner work and technician work
The owner-fixable end of this list is noise and vibration and leaks and water on the floor, which start with seals, filters, clearances and settings and need no panel off. The line is crossed as soon as a check needs a meter on live terminals, the sealed system opened, or the cabinet emptied and moved, and it is the same line on every listing in the table.
Other families of this brand
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
