What this family is
The T refrigerator family covers three listings, T36 through T60, and the table below is the whole of what the spine records about them. What dominates on this platform is cooling and temperature faults, with ice-making faults behind it.
What goes wrong on these models
- Cooling and temperature faults — the compressor starts, runs a short while, then stops and starts again — See: Alpicool T Refrigerator: Not Cooling or Not Freezing.
- Ice-making faults — it freezes on mains power but not from the vehicle socket — See: Alpicool T Refrigerator: Ice Maker Fault.
- Leaks and water on the floor — water appears under the unit after it has been moved — See: Alpicool T Refrigerator: Water Leak.
- Noise and vibration — a ticking or whirring that rises and falls — See: Alpicool T Refrigerator: Abnormal Noise or Vibration.
Problem classes in frequency order
- 1. Cooling and temperature faults — The usual answer in this class is blocked heat rejection at the condenser. It moves up on T because the three listings grow the cabinet without growing the vent face in proportion, so the largest of them is the tightest for air.
- 2. Ice-making faults — On this platform it is what the box has actually been asked to do, more often than anything else.
- 3. Leaks and water on the floor — On these models the class is led by condensation from warm, humid air.
- 4. Noise and vibration — Led here by the surface underneath it.
Models in the T family — The listings this family covers; it is a family page, not a model page.
Reference| Model number | Family key |
|---|---|
| T36 | alpicool:refrigerator:t |
| T50 | alpicool:refrigerator:t |
| T60 | alpicool:refrigerator:t |
Problem classes on this family — Ordering only: no snapshot behind this family carries a counted denominator, so no share is printed.
General guidance| Problem class | Relative frequency on this family |
|---|---|
| Cooling and temperature faults | first by report |
| Ice-making faults | second |
| Leaks and water on the floor | third |
| Noise and vibration | fourth |
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. Never cut into the sealed refrigerant circuit, and never chip ice off the plate with a blade, because the tubing behind it is thin-walled.
Owner work and technician work
An owner can reach leaks and water on the floor and noise and vibration without a tool beyond a torch and a cloth. The line is crossed as soon as a check needs a meter on live terminals, the sealed system opened, or the cabinet emptied and moved, and it is the same line on every listing in the table.
Other families of this brand
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
