What this family is
The TS refrigerator family covers three listings, TS40 through TS60, and the table below is the whole of what the spine records about them. What dominates on this platform is cooling and temperature faults, with leaks and water on the floor behind it.
What goes wrong on these models
- Cooling and temperature faults — the panel is lit and the set temperature is displayed, but nothing inside is cold — See: Alpicool TS Refrigerator: Not Cooling or Not Freezing.
- Leaks and water on the floor — the outside of the cabinet is beaded with moisture — See: Alpicool TS Refrigerator: Water Leak.
- Ice-making faults — ice forms only on one side of the compartment — See: Alpicool TS Refrigerator: Ice Maker Fault.
- Noise and vibration — a rattle that comes and goes with the compressor — See: Alpicool TS Refrigerator: Abnormal Noise or Vibration.
Problem classes in frequency order
- 1. Cooling and temperature faults — Led here by nowhere for the heat to go. It moves up on TS because the three listings grow the cabinet without growing the vent face in proportion, so the largest of them is the tightest for air.
- 2. Leaks and water on the floor — The usual answer in this class is condensation from warm, humid air.
- 3. Ice-making faults — On this platform it is a plate wearing a coat, more often than anything else.
- 4. Noise and vibration — On these models the class is led by the condenser fan and what is near it.
Models in the TS family — The listings this family covers; it is a family page, not a model page.
Reference| Model number | Family key |
|---|---|
| TS40 | alpicool:refrigerator:ts |
| TS50 | alpicool:refrigerator:ts |
| TS60 | alpicool:refrigerator:ts |
Problem classes on this family — Ordering only: no snapshot behind this family carries a counted denominator, so no share is printed.
General guidance| Problem class | Relative frequency on this family |
|---|---|
| Cooling and temperature faults | most reported |
| Leaks and water on the floor | common |
| Ice-making faults | less common |
| Noise and vibration | occasional |
Before you open anything
Safety
Unplug the appliance or switch off its breaker before removing any panel; a capacitor can hold a charge after the power is off. Never cut into the sealed refrigerant circuit, and never chip ice off the plate with a blade, because the tubing behind it is thin-walled.
Owner work and technician work
An owner can reach leaks and water on the floor and noise and vibration without a tool beyond a torch and a cloth. The line is crossed as soon as a check needs a meter on live terminals, the sealed system opened, or the cabinet emptied and moved, and it is the same line on every listing in the table.
Other families of this brand
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
