The short answer for the BCD models
On the Aglucky BCD refrigerator models, a noise or a vibration that is new leads with a fan blade catching ice or a stray item rather than with the cause the brand-generic article opens on. The spine for the BCD family names a handful of codes that share their opening characters, so the platform is one and the differences are at the margins.
What you observe on these models
- Clicking every few minutes with no change in cooling — A relay trying and failing to start, or a normal control cycling — those sound alike and mean very different things.
- It is much louder at night than during the day — The room is quiet and the floor and walls are carrying the sound. Worth ruling out before anything is bought.
- A ticking or scraping from inside the freezer — Regular, fast, and usually stopping the moment the freezer door is opened.
- NEAR MISS — it is noisy and it has also stopped getting cold — Two symptoms together point at the cooling page rather than at this one.
Causes, most likely first on the BCD family
- A fan blade catching ice or a stray item — Ice builds where the air passes, and the blade finds it. The noise usually stops when the freezer door is opened, because the door switch cuts the fan. Ranked first here.
- Something loose on, in or behind the cabinet — The drip pan underneath is the classic one: out of its brackets, it buzzes against the frame and sounds exactly like a failing motor. Second.
- The compressor itself — A knocking or labouring noise from the compressor, or a relay clicking without a start. Last, and that is the point of the order.
- Body: The cause that moves up on these models is a fan blade catching ice or a stray item; what moves down to make room for it is a normal noise that has become audible, which is where the brand-generic article for this symptom opens.
Check in this order, and why
- Open the freezer door while the noise is happening — First: On most cabinets that cuts the fan. If the noise stops, the fan is making it.
- Clear the top, the sides and the back, then listen again — Second: Half of these noises are objects, and objects are free to remove.
- Feel the condenser fan grille for airflow and for dust — Third: A choked shroud makes its own noise and is reachable without opening the cabinet.
- Pull the cabinet out of its surround and run it standing free — Fourth: If the noise drops away in the open, the cabinet is fine and the installation is what needs attention.
Before you open anything
Safety
Power off at the plug or the breaker before anything is opened. A capacitor keeps its charge after the switch, and the fan behind the rear panel can start on its own. The sealed refrigerant side is licensed work rather than owner work. Deal with the food first: a refrigerator holds food safely at 40 degrees Fahrenheit, 4 degrees Celsius, or below, and a freezer at 0 degrees Fahrenheit.
Models covered by the BCD family
Reference| Model number | Family key |
|---|---|
| BCD-70 | aglucky:refrigerator:bcd |
| BCD-87 | aglucky:refrigerator:bcd |
When to call a technician
Stop and call at the point where a panel has to come off with power on, and call without hesitating if what you are looking at is the compressor itself. Call immediately, and unplug the cabinet first, if you smell burning, see oil around the compressor, or hear a hiss with a sharp smell.
Other symptoms covered for the BCD family
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
