Dryer running but not heating? We fix heating elements, thermal fuses, and igniters. Same-day service, 90-day warranty. Average repair cost: $100–$350. Professional service recommended.
Dryer not heating repair typically costs $100 to $350. This repair requires professional tools and expertise. Most repairs are completed in 1-2 hours with a free diagnostic visit.
Campbell's bungalows and ranch homes from the early 1960s across neighborhoods like Pruneyard, Hacienda Park, and the downtown corridor experience dryer heating failures shaped by warm South Bay conditions and the city's mid-century housing character. Homes built around the 1962 median year typically have compact 1,400-square-foot layouts with dryers in garage or utility room installations. Summer highs average 84°F with low humidity, creating moderate thermal stress on heating components. San Jose Water Company water at 250 TDS is moderately hard, leaving mineral residue on laundry. Campbell's smaller households averaging 2.5 persons put moderate demand on dryers, but the aging vent infrastructure in these 60-year-old homes is the primary driver of heating complaints. Many homes retain original semi-rigid aluminum vent connections and wall ductwork that have degraded over decades. With 6 local repair providers, Campbell draws from the larger San Jose market for expanded availability.
Campbell's bungalows and ranch homes from the early 1960s sit in the warm South Bay with summer highs of 84°F and low humidity. Compact 1,400-square-foot layouts have aging vent infrastructure dating back 60+ years. San Jose Water Company water at 250 TDS is moderately hard. Households of 2.5 persons put moderate demand on dryers, but the aging infrastructure rather than heavy use is the primary driver of heating failures across Pruneyard and Hacienda Park neighborhoods.
Burned out heating element
Blown thermal fuse
Faulty gas igniter
Failed thermostat
Restricted vent
The thermal fuse is a one-shot safety device that cuts heating when the dryer overheats. In Bay Area row houses where vent runs exceed 20 feet with multiple elbows, lint accumulates rapidly and triggers overheating. Fog-season humidity makes lint sticky, accelerating blockage.
Cost: $120–$200 | Time: 30-60 minutes
Electric dryer heating coils break from thermal cycling stress. Units in Bay Area homes running extended cycles (due to clothes entering damp from fog exposure) heat more hours annually than dryers in dry climates, shortening element life.
Cost: $150–$280 | Time: 45-75 minutes
Gas dryer ignition solenoids weaken over time, failing to open the gas valve reliably. The dryer starts hot but goes cold mid-cycle as solenoids cannot hold open under reduced coil strength. Common in Oakland and Berkeley homes with gas utility connections.
Cost: $140–$250 | Time: 45-60 minutes
The igniter glows orange but lacks sufficient heat to trigger the gas valve. The dryer runs but produces no heat. Bay Area homes with gas dryers in damp basements see faster igniter degradation from ambient moisture exposure.
Cost: $130–$220 | Time: 45-60 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $100–$350 |
| Repair time | 1-2 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
This repair involves electrical components or sealed systems requiring professional tools and certification.
Bay Area dryer repairs average $150-$350. Campbell has 6 competing providers including De Anza Appliance, Appliance Repairman Bay Area, and SimpleFix Appliance Repair. The city's proximity to San Jose expands the available provider network to 65+ in the combined market. Diagnostic fees of $89-$129 are waived with approved repair.
In Campbell, wide day-night temperature swings (30f+ delta) stress thermal expansion joints, thermostat cycling, and sealed-system pressures. This can affect your appliance's gas valve coils: temperature swings weaken the gas valve solenoid coils over time, causing intermittent ignition failures mid-cycle (the classic "cycles fine then stops heating" symptom) If the dryer heats initially then stops, replace the gas valve coils as a set — this is the most common gas dryer repair
Free diagnostic visit for not heating issues. Same-day appointments available in Campbell.
Book Free DiagnosticReviewed by Robert Aguilar, Field Service Manager & Technical Reviewer