Want a regional phone & address? Pick your area.
Whirlpool·Washerlow severity
Whirlpool Washer Error Code uL
Unbalanced load during spin
Common Causes
- 1A single heavy item thrown to one side of the basket
- 2A small load unable to distribute evenly
- 3The washer not sitting level on the floor
- 4Worn suspension rods or shocks no longer damping the basket
Step-by-Step Troubleshooting
- 1
Open the lid and spread the wash evenly around the Cabrio basket so no one side carries the weight
- 2
Wash lone bulky items like a comforter or bath mat with a few similar-weight pieces to help them balance
- 3
Set a level across the top and adjust the leveling feet until the cabinet no longer rocks
- 4
If a normal load still triggers it, check the suspension rods or shock absorbers for wear that lets the basket wobble
Pro Diagnostic Tip
This warning means the machine kept re-filling to redistribute the load and finally gave up on a clean spin, so clothes come out soaking. On a Cabrio top-loader a persistent unbalance on evenly loaded washes points at worn suspension rods, a common wear item that lets the basket swing and defeat the balance routine.
You Might Also Notice
- •Clothes come out very wet after the final spin
- •The washer bangs or walks during spin
- •The cycle keeps re-filling and adding time
- •The basket wobbles visibly at high speed
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$0–$250
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Suspension rod kitShock absorber
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Redistribute the load and restart the spin
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code uL disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Whirlpool error code uL mean?
Whirlpool error code uL indicates: Unbalanced load during spin. This is a low-severity issue affecting your washer.
How do I fix Whirlpool error code uL?
Open the lid and spread the wash evenly around the Cabrio basket so no one side carries the weight Then, Wash lone bulky items like a comforter or bath mat with a few similar-weight pieces to help them balance Then, Set a level across the top and adjust the leveling feet until the cabinet no longer rocks There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error uL?
Besides the error code on the display, common signs include: Clothes come out very wet after the final spin; The washer bangs or walks during spin; The cycle keeps re-filling and adding time. If you notice any of these symptoms, check your washer's display panel for error code uL.
How much does it cost to fix Whirlpool uL?
Repair costs for Whirlpool uL typically range from $0 to $250 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online