Want a regional phone & address? Pick your area.
Whirlpool·Oven / Rangemedium severity
Whirlpool Error Code F1
Touch pad / clock error
Common Causes
- 1Defective touch pad
- 2Clock failure
Step-by-Step Troubleshooting
- 1
Disconnect power at the breaker for 5 minutes to reset the ERC
- 2
If the error returns immediately on power-up, the ERC (Electronic Range Control) is faulty
- 3
If the error appears only when specific keys are pressed, the touch pad membrane is faulty
- 4
Disconnect the ribbon cable between the touch pad and ERC — if the error clears, the touch pad is the issue
- 5
Replace the ERC if the error persists with the touch pad disconnected
Pro Diagnostic Tip
F1 is the most common oven error code across all Whirlpool Corporation brands. On KitchenAid and Jenn-Air ranges, the ERC is typically integrated with the touch pad as a single assembly ($300+). On Whirlpool and Maytag, they are separate parts. Always check the model-specific parts diagram before ordering.
You Might Also Notice
- •Oven stops heating mid-cycle
- •Display goes blank then shows F1
- •Clock does not keep time accurately
- •Oven pre-heat cycle never completes
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$180–$400
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10348710 Electronic Range Control (ERC)W11122555 Touch Pad / Membrane Switch
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Whirlpool error code F1 mean?
Whirlpool error code F1 indicates: Touch pad / clock error. This is a medium-severity issue affecting your oven / range.
How do I fix Whirlpool error code F1?
Disconnect power at the breaker for 5 minutes to reset the ERC Then, If the error returns immediately on power-up, the ERC (Electronic Range Control) is faulty Then, If the error appears only when specific keys are pressed, the touch pad membrane is faulty There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven / range has error F1?
Besides the error code on the display, common signs include: Oven stops heating mid-cycle; Display goes blank then shows F1; Clock does not keep time accurately. If you notice any of these symptoms, check your oven / range's display panel for error code F1.
How much does it cost to fix Whirlpool F1?
Repair costs for Whirlpool F1 typically range from $180 to $400 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.