Want a regional phone & address? Pick your area.
Thermador·Dishwashermedium severity
Thermador Dishwasher Error Code E18
Water supply / no fill detected
Common Causes
- 1Household supply valve closed
- 2Inlet hose kinked behind the unit
- 3Inlet valve inlet screen clogged
- 4Low household water pressure
Step-by-Step Troubleshooting
- 1
Reach under the adjacent sink and confirm the dishwasher supply stop is fully open, not merely cracked
- 2
Straighten any pinch in the braided inlet hose where it loops behind the Thermador cabinet
- 3
Close the supply, disconnect the hose at the valve, and run it into a bucket to gauge whether the house is delivering a strong stream
- 4
Clean the fine mesh screen at the inlet valve, a frequent sediment trap on older galvanized supply lines
Pro Diagnostic Tip
Homes on aging galvanized plumbing shed sediment that clogs the Thermador inlet screen faster than copper or PEX runs — an inline sediment filter ahead of the supply stop prevents repeat E18 calls.
You Might Also Notice
- •Program starts but no water enters
- •Faint buzzing at the fill valve
- •Wash arms fail to build pressure
- •Cycle stretches far past its normal length
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$90–$260
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Water inlet valveInlet screen filter
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Confirm the supply valve is open and the inlet hose is unkinked
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E18 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Thermador error code E18 mean?
Thermador error code E18 indicates: Water supply / no fill detected. This is a medium-severity issue affecting your dishwasher.
How do I fix Thermador error code E18?
Reach under the adjacent sink and confirm the dishwasher supply stop is fully open, not merely cracked Then, Straighten any pinch in the braided inlet hose where it loops behind the Thermador cabinet Then, Close the supply, disconnect the hose at the valve, and run it into a bucket to gauge whether the house is delivering a strong stream There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my dishwasher has error E18?
Besides the error code on the display, common signs include: Program starts but no water enters; Faint buzzing at the fill valve; Wash arms fail to build pressure. If you notice any of these symptoms, check your dishwasher's display panel for error code E18.
How much does it cost to fix Thermador E18?
Repair costs for Thermador E18 typically range from $90 to $260 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online