Want a regional phone & address? Pick your area.
Thermador·Dishwashermedium severity
Thermador Dishwasher Error Code E06
Door closure / latch sensor fault
Common Causes
- 1Door latch microswitch worn
- 2Latch hook misaligned
- 3Harness break at the hinge
Step-by-Step Troubleshooting
- 1
Open and firmly re-close the Thermador door, listening for the twin latch hooks to seat with a positive double click
- 2
Inspect the latch catch and strike plate at the top of the tub for food debris or a bent hook that blocks full engagement
- 3
Test the latch microswitch for continuity in the closed position — it should make a circuit only when the door is fully shut
- 4
Flex the harness where it crosses the door hinge and watch for an intermittent break, a common failure on units opened many times a day
Pro Diagnostic Tip
Thermador flush-panel installations add cabinetry weight to the door, which slowly drops the latch alignment. If E06 appears only when the custom panel is fitted, adjust the door springs before replacing the latch.
You Might Also Notice
- •Unit will not start although the door seems shut
- •Display reports the door open with it latched
- •Intermittent failures to begin a program
- •Latch feels loose or rattles
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$150–$340
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Door latch assemblyDoor latch switch
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E06 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Thermador error code E06 mean?
Thermador error code E06 indicates: Door closure / latch sensor fault. This is a medium-severity issue affecting your dishwasher.
How do I fix Thermador error code E06?
Open and firmly re-close the Thermador door, listening for the twin latch hooks to seat with a positive double click Then, Inspect the latch catch and strike plate at the top of the tub for food debris or a bent hook that blocks full engagement Then, Test the latch microswitch for continuity in the closed position — it should make a circuit only when the door is fully shut There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my dishwasher has error E06?
Besides the error code on the display, common signs include: Unit will not start although the door seems shut; Display reports the door open with it latched; Intermittent failures to begin a program. If you notice any of these symptoms, check your dishwasher's display panel for error code E06.
How much does it cost to fix Thermador E06?
Repair costs for Thermador E06 typically range from $150 to $340 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online