Want a regional phone & address? Pick your area.
Samsung·Washerhigh severity
Samsung Washer Error Code LC
Water leak detected by the base leakage sensor
Common Causes
- 1A leak at an internal hose or clamp inside the cabinet
- 2Cracked detergent dispenser or its supply hose
- 3Split door boot seal on a front-loader
- 4A wet leak sensor giving a false trip after condensation
Standing water in the base sits near mains-voltage connectors. Keep the washer unplugged and the pan dry before probing the sensor or its wiring.
Step-by-Step Troubleshooting
- 1
Unplug the washer and tip it back to inspect the base pan and the leak sensor mounted there for standing water or damp residue
- 2
Trace every internal hose — inlet, recirculation, and drain — and retighten any spring clamp loose enough to weep during the spray fill
- 3
Examine the door boot seal or top-load tub seal for splits, folding the front boot back to check for trapped debris holding it open
- 4
Dry the base and the sensor completely, then run a rinse cycle and watch for the first point where water reappears on the pan
- 5
If the pan stays dry after drying yet LC returns, the leak sensor itself has failed and needs replacement
Pro Diagnostic Tip
Samsung latches LC until the base sensor reads dry, so the code can persist for a cycle or two after a real leak is fixed and the pan is towel-dried. A unit that trips LC only during the high-pressure spray rinse usually has a loosened recirculation hose clamp rather than a failed seal.
You Might Also Notice
- •Water on the floor under the front of the washer
- •Cycle pauses and drains unexpectedly
- •Damp or musty smell from the door boot
- •Error returns during the rinse spray
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$130–$320
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Base leak sensorInternal hose clampsDoor boot seal
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code LC is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Samsung error code LC mean?
Samsung error code LC indicates: Water leak detected by the base leakage sensor. This is a high-severity issue affecting your washer.
How do I fix Samsung error code LC?
Unplug the washer and tip it back to inspect the base pan and the leak sensor mounted there for standing water or damp residue Then, Trace every internal hose — inlet, recirculation, and drain — and retighten any spring clamp loose enough to weep during the spray fill Then, Examine the door boot seal or top-load tub seal for splits, folding the front boot back to check for trapped debris holding it open There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error LC?
Besides the error code on the display, common signs include: Water on the floor under the front of the washer; Cycle pauses and drains unexpectedly; Damp or musty smell from the door boot. If you notice any of these symptoms, check your washer's display panel for error code LC.
How much does it cost to fix Samsung LC?
Repair costs for Samsung LC typically range from $130 to $320 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online