Samsung Appliance Error Codes
Complete reference guide with 56+ error codes for Samsung appliances, including Dacor. Find your error code below, understand the cause, and learn if it's a DIY fix or needs professional repair.
Parent company: Samsung Electronics | Also covers: Dacor
| Code | Description | Severity |
|---|---|---|
| 1E | Freezer room sensor error Causes: Sensor separation, Connection issue, Short circuit | high |
| 2E | Fridge room sensor error Causes: Sensor malfunction, Wiring issue | high |
| 4E | Freezer defrost sensor error Causes: Loose wiring, Sensor failure | medium |
| 5E | Fridge defrost sensor error Causes: Sensor failure, Wiring issue | medium |
| 8E | Ice maker sensor error Causes: Wiring issue, Sensor failure | medium |
| 21E | Freezer fan error Causes: Iced-over fan, Failed motor, Door left open | high |
| 22E Also: 22C | Fridge fan error Causes: Ice buildup on fan, Fan motor failure | high |
| 33E | Ice pipe heater error Causes: Fill tube heater failure, Wiring issue | medium |
| 39E Also: 39C | Ice maker sensor error Causes: Wiring issue, Water line problem | medium |
| 40E Also: 40C | Freezer defrost / ice fan error Causes: Frost buildup, Defrost failure | medium |
| 76C | Water in Autofill compartment Causes: Spilled water, Condensation | low |
| 84E | Compressor / rotor lock error Causes: DC compressor failure, Rotor locked | high |
| 85C | Low voltage warning Causes: Power fluctuation, Outlet issue | medium |
| 88 88 Also: 83E, 85E, 86E | Power or voltage error Causes: Power surge, Brownout, Communication failure | high |
| PC ER Also: PC CH | Communication error between panels Causes: Board failure, Wiring issue | high |
| OF OF Also: O FF, OFF OFF | Cooling off / demo mode Causes: Demo mode enabled, Accidental activation | low |
When to Call a Professional
- Error code returns after power reset
- Code is marked as high severity
- Appliance is leaking water, making unusual noises, or smells like burning
- You're not comfortable working with electrical or gas appliances
Samsung Error Codes — FAQ
What are the most common Samsung error codes?
The most common Samsung error codes relate to temperature sensors, drainage issues, motor errors, and communication failures. Check our complete list above for your specific code, or call EasyBear for professional diagnosis.
How do I reset my Samsung appliance after an error code?
For most Samsung appliances, unplug the unit or turn off the circuit breaker for 60 seconds, then restore power. If the error code returns after reset, the underlying issue needs professional repair.
Can I fix a Samsung error code myself?
Some Samsung error codes indicate simple issues like unbalanced loads, clogged filters, or suds buildup that you can fix yourself. Our table above marks each code as DIY-fixable or requiring professional service. For high-severity codes, always call a certified technician.
How much does Samsung appliance repair cost in San Francisco?
Samsung appliance repair in the Bay Area typically costs $100-$500 depending on the issue. Simple fixes run $100-$200, while complex repairs (compressor, control board) can be $300-$600. At EasyBear, diagnosis is free when you proceed with the repair.
Does Samsung warranty cover error code repairs?
Samsung manufacturer warranty typically covers defects for 1-2 years from purchase. Some components (like LG linear compressors) have extended coverage. Our technicians can verify your warranty status and handle claims. Even out-of-warranty repairs are affordable with EasyBear.
Do Dacor use the same error codes as Samsung?
Dacor are part of the Samsung family and often share similar platforms and error code systems. However, some models may have unique codes. Our reference covers error codes for all brands in this family.