Want a regional phone & address? Pick your area.
Samsung·Dryermedium severity
Samsung Error Code FE
Power frequency error
Common Causes
- 1Power supply disruption
- 2Frequency issue
Step-by-Step Troubleshooting
- 1
This error indicates the power supply frequency is outside the 60 Hz (US standard) range. It typically occurs when the dryer is connected to a generator or unstable power source
- 2
Unplug the dryer and plug it into a standard wall outlet connected to utility power (not a generator)
- 3
If the error appears on utility power, use a frequency meter to check — it should read 59.5-60.5 Hz. Significant deviation suggests a utility issue
- 4
If the power frequency is normal, the main control board frequency detection circuit may be faulty. Replace the main board
Pro Diagnostic Tip
FE codes are extremely rare on utility power in California. If you see FE in a home, check for a faulty automatic transfer switch (ATS) for a backup generator — some ATS units cause brief frequency instability during switching that the Samsung board detects.
You Might Also Notice
- •Dryer will not start at all
- •Error appears immediately at power-on
- •Issue only occurs when running on generator power
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$150–$325
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Main control board (Samsung DC92-01606A or model-specific) if frequency detection circuit is faulty
Do You Have the Right Tools?
Gas leak detector ($130), thermal fuse tester ($95), belt tension gauge, and vent inspection camera ($180). Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas dryers carry carbon monoxide and explosion risk. Even electric dryers involve 240V circuits that can deliver a fatal shock. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code FE disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
$89 → $0 Service Call & Diagnosis — offer ends May 31
Frequently Asked Questions
What does Samsung error code FE mean?
Samsung error code FE indicates: Power frequency error. This is a medium-severity issue affecting your dryer.
How do I fix Samsung error code FE?
This error indicates the power supply frequency is outside the 60 Hz (US standard) range. It typically occurs when the dryer is connected to a generator or unstable power source Then, Unplug the dryer and plug it into a standard wall outlet connected to utility power (not a generator) Then, If the error appears on utility power, use a frequency meter to check — it should read 59.5-60.5 Hz. Significant deviation suggests a utility issue There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my dryer has error FE?
Besides the error code on the display, common signs include: Dryer will not start at all; Error appears immediately at power-on; Issue only occurs when running on generator power. If you notice any of these symptoms, check your dryer's display panel for error code FE.
How much does it cost to fix Samsung FE?
Repair costs for Samsung FE typically range from $150 to $325 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.