Want a regional phone & address? Pick your area.
Frigidaire·Ovenhigh severity
Frigidaire Oven Error Code F10
Runaway oven temperature
Common Causes
- 1Oven temperature sensor shorted
- 2Relay on control board stuck
- 3Oven cycling too hot
F10 is a fire safety code. Do not use the oven until repaired. Keep breaker off until diagnosed.
Step-by-Step Troubleshooting
- 1
Cancel cook cycle, open oven door, and disconnect power at breaker immediately
- 2
After cool-down, test RTD sensor — should read ~1080 ohms at room temperature
- 3
If sensor reads normal, the bake relay on the control board is stuck closed
- 4
Check sensor wire connections at both sensor and board ends for loose pins
Pro Diagnostic Tip
SAFETY: Disconnect power immediately. Test RTD sensor — ~1080 ohms at room temp. If normal, the control board relay is stuck closed.
You Might Also Notice
- •Oven overheats past set temperature
- •Smoke from oven during normal bake
- •Burning food despite correct settings
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$150–$400
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
316490000 oven temperature sensor (RTD probe)316576600 electronic oven control board
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code F10 is a high-severity issue that can cause further damage to your oven if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Frigidaire error code F10 mean?
Frigidaire error code F10 indicates: Runaway oven temperature. This is a high-severity issue affecting your oven.
How do I fix Frigidaire error code F10?
Cancel cook cycle, open oven door, and disconnect power at breaker immediately Then, After cool-down, test RTD sensor — should read ~1080 ohms at room temperature Then, If sensor reads normal, the bake relay on the control board is stuck closed There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven has error F10?
Besides the error code on the display, common signs include: Oven overheats past set temperature; Smoke from oven during normal bake; Burning food despite correct settings. If you notice any of these symptoms, check your oven's display panel for error code F10.
How much does it cost to fix Frigidaire F10?
Repair costs for Frigidaire F10 typically range from $150 to $400 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.