Want a regional phone & address? Pick your area.
Frigidaire·Ovenmedium severity
Frigidaire Oven Error Code F30
Open oven temperature sensor
Common Causes
- 1Sensor probe failed open
- 2Connector at rear wall loose
- 3Wiring damaged by heat
Step-by-Step Troubleshooting
- 1
Pull range from wall and remove rear panel
- 2
Locate oven sensor connector and reseat it firmly
- 3
Test sensor resistance — should be ~1080 ohms at room temp
- 4
If open circuit (infinite), replace the sensor probe
Pro Diagnostic Tip
A loose connector at the back of the range is the most common F30 cause — reseat before buying a new sensor. If F30 appeared during or after self-clean, the sensor failed from thermal fatigue.
You Might Also Notice
- •Oven will not heat at all
- •Display shows temperature but oven stays cold
- •Error appears during self-clean
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$50–$175
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
316490000 oven temperature sensor/RTD probe
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Check sensor connection at rear of oven
This repair requires combustion analyzers, gas pressure manometers, and temperature calibration instruments. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F30 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Frigidaire error code F30 mean?
Frigidaire error code F30 indicates: Open oven temperature sensor. This is a medium-severity issue affecting your oven.
How do I fix Frigidaire error code F30?
Pull range from wall and remove rear panel Then, Locate oven sensor connector and reseat it firmly Then, Test sensor resistance — should be ~1080 ohms at room temp There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my oven has error F30?
Besides the error code on the display, common signs include: Oven will not heat at all; Display shows temperature but oven stays cold; Error appears during self-clean. If you notice any of these symptoms, check your oven's display panel for error code F30.
How much does it cost to fix Frigidaire F30?
Repair costs for Frigidaire F30 typically range from $50 to $175 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.