E2 and a hot kitchen
Whirlpool describes E2 as the control panel switching off because the electronic parts inside have become too hot; the cooktop has to cool down before it is used again. The electronics cool themselves with the air around and below the cooktop, so a kitchen that is already hot leaves them less margin. Summer afternoons, sun through a window onto the glass, an oven door left open to warm the room, or a range hood switched off while several zones run can all push the temperature up. Let the cooktop cool, cool the room where you can, and restart.
Error codes
Reference| Code | Meaning |
|---|---|
| E2 | The control panel switches off because of excessively high temperatures. The internal temperature of the electronic parts is too high. Wait for the cooktop to cool down before using it again. |
Signs that room heat plays a part
- E2 on hot days only — The code appears in summer or a heatwave and rarely otherwise. That seasonal pattern points to the air the cooktop breathes.
- Sun on the glass — Direct sunlight warms the surface and the electronics beneath before cooking even starts.
- The oven door open nearby — Heat pouring from an open oven rises around the cooktop. Some people do this to warm the kitchen in winter, which has the same effect.
- A hood left off — Without extraction, hot air lingers over and around the cooktop.
- Normal behaviour in cooler weather — A sign that the cooktop itself is probably sound.
Ranked causes of E2 in a warm kitchen
- High room temperature — First: hot air gives the electronics little room to shed their own heat.
- Several zones on high at once — Second: total output adds to the heat around the controls.
- Heat from nearby appliances — Third: an open oven, a dishwasher venting steam, or a toaster oven close by. Each adds a little to the air the electronics rely on.
- A fault in the cooling — Fourth: suspected when E2 appears in a cool kitchen during light use.
Checks in order
- Let the cooktop recover — Leave it switched off until the glass feels cool.
- Check the room — Note the temperature and whether sun is falling on the cooktop.
- Switch on the hood — Run the extractor while cooking. A hood on its lowest setting moves less air, so try a higher one.
- Close the oven door — Keep oven heat inside the oven.
- Restart with fewer zones — Spread the cooking out and watch for E2.
Owner steps for E2
- Switch off and wait — Give the cooktop time to cool before restarting.
About 20 min
- Shade the cooktop — Draw a blind if afternoon sun hits the glass.
About 1 min
- Run the range hood — Use a medium or high fan setting while cooking.
Tools: ::
- Cook at cooler times — On hot days, cook in the morning or evening where possible.
Tools: ::
- Book a check if E2 appears in a cool kitchen — A technician tests the cooling and the electronics.
Tools: ::
Safety on hot days
Safety
Never leave the cooktop running unattended while it is prone to switching off; pans may stop heating partway and be forgotten. The glass stays hot after the controls go dark, so keep children away until it has cooled. Do not remove the cooktop or its trim to improve airflow yourself. If you smell burning, switch off at the breaker.
When E2 needs a professional
Call if E2 appears in a cool kitchen, during light cooking, or within minutes of switching on. A professional checks the cooktop's cooling path, its temperature sensing and the installation. If the code only ever appears on very hot days, mention it, as that pattern helps the diagnosis.
Whirlpool cooktop codes about temperature
Cooktops covered by this page
Meant for Whirlpool cooktops with electronic controls whose code list includes E2. Ovens, knob-operated gas hobs and other brands are excluded. There is no separate E2 page for individual models; ventilation needs differ, so your installation instructions are the reference.
A related Whirlpool cooktop code
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
