The short answer
On an Indel B refrigerator, a new noise from a cabinet that is otherwise cooling is usually vibration through an unlevel cabinet rather than a failing compressor. Second, and worth checking in the same hour, is a variable-speed compressor changing note. Work the order below -- cheap causes first, the one that is not an owner fix last.
What you are looking at
- A rattle or slap from underneath — It comes from the floor level, behind the grille.
- A knock that does not change with the door — It is heavy, metallic and regular.
- A rhythmic ticking or warble from inside — It changes or stops when the door is opened.
- NEAR MISS -- the noise came with a warm cabinet — Noise plus no cooling is a different page; fix the cooling fault first.
Causes, most likely first on this kind of unit
- The cabinet is rocking on uneven feet — A cabinet that is not level transmits normal compressor vibration into the floor and into itself. Ranked first on an Indel B mobile unit in moving hot air: weight and a hard floor turn a small imbalance into a noise you can hear in the next room.
- The variable-speed compressor changed pitch — A DC compressor ramps its speed with load, so its note rises and falls. This rank, because a note that tracks the load rather than a fixed hum points at speed control, not damage.
- The condenser fan is fouled — The fan by the compressor pulls room air across the coil. This rank, because a fouled blade is audible from underneath and stops when the compressor cycles off.
- The compressor mounts or the compressor itself — Hardened rubber grommets let the compressor knock against its frame; internal wear gives a heavy metallic knock that does not change with the door. Last, and that is the point of the order: it is last because every cheaper sound above has to be eliminated first.
Check in this order, and why
- Push each top corner and watch for rock — Any movement means the feet are carrying uneven load; set them and recheck.
- Note whether the pitch tracks the load — A note that rises after a door opening and settles later is speed control doing its job.
- Only after the checks above are clean — A heavy knock that ignores the door and tracks the compressor is a service call.
What an owner can safely check
- Open the door and listen for the change — A noise that stops with the door open is inside the cabinet, on the fan side.
About 5 min
- Push each top corner and set the feet level — Stop the rock first; it is free and it removes the loudest false alarm.
Tools: levelAbout 15 min
- Unplug, pull the cabinet out and clear the condenser fan — Clear dust from the blade and guard, and remove anything leaning on the grille.
Tools: vacuum, flashlightAbout 25 min
- STOP HERE -- do not unbolt a compressor mount — Mounts and compressors are technician work, and the system is under pressure.
Before you open anything
Safety
Power off at the plug or the breaker before any panel comes off.
When to call a technician
The line is simple: anything you can reach without a panel is yours, anything behind a panel or on the sealed system is a technician's.
Nearest pages of this class
What this page does not cover
This page covers the Indel B refrigerator as a class, not one family or model line. Where a family- or model-specific page exists for your unit it is the more specific answer -- go there first if your model is named. Deliberately not here: fan part numbers, grommet kits, panel-removal order and the acoustic signature of each family, all of which differ by model line.
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
