The short answer for this family
On the Cowsar KS refrigerator family the first question is not why the icemaker stopped but whether these models carry one at all: a compact cabinet of this type usually has a small freezer box and an ice tray rather than an automatic icemaker. Where one is fitted, the fault splits cleanly into a water side and a cold side, and the mould tells you which. Check your own code against the two in the table below.
What this looks like on this platform
- No ice at all, and the mould is dry — A dry mould means no water is arriving: supply, valve, filter or fill tube. A wet mould that never harvests means the cold side instead.
- It makes ice, but far less than it used to — Reduced output with correct cubes is nearly always a cabinet running warmer than it was, or a filter at the end of its life.
- Ice forming in a solid mass where loose cubes should be — A clumped mass usually means the cabinet is warming and refreezing between cycles rather than that the icemaker is faulty.
- NEAR MISS: the cabinet is also not holding temperature — Ice output is the first thing a cabinet gives up when it runs warm. If the compartment is warm too, read the cooling page first.
Causes, most likely first on this platform
- These models do not all carry a factory icemaker — First here because it is the answer for most owners of this family: a compact cabinet of this type usually has a small freezer box and an ice tray rather than an automatic icemaker. Establish whether your model has one, and whether it is factory or an accessory.
- Ice forming where it should not, rather than failing to form — On this family the question is usually the other way round. On a compact cabinet, frost on the cold plate is normal and is cleared by switching the cabinet off; a solid build behind it is not. That is the version of this fault most owners of this family actually meet.
- The compartment is not cold enough to harvest — An icemaker will not cycle until its mould reaches cut-out, so a warm compartment gives slow ice or none with nothing wrong in the icemaker. A freezer holds food safely at 0 °F (-18 °C) or below.
The checking order on these models
- Establish whether this model has a factory icemaker at all — Check your model number against the roster below and look inside the compartment. On this family that check answers the question for most owners, and it costs nothing. Confirm your own model against the table first.
- Look for stray ice and ask where the water came from — On a compact cabinet, frost on the cold plate is normal and is cleared by switching the cabinet off; a solid build behind it is not. Ask where the water came from before you clear it, because clearing it without answering that question guarantees it returns.
- Check the compartment temperature before the icemaker — A compartment sitting above where it should be explains slow ice, clumped ice and no ice with nothing wrong in the icemaker itself.
Before any panel comes off
Safety
Unplug the appliance or switch off its breaker before removing any panel or icemaker assembly; a capacitor can hold a charge after the power is off. Where the cabinet is plumbed, shut the water supply off before touching a fitting, and never thaw a fill tube or a frozen line with a flame or a heat gun: hot air melts the surrounding plastic long before it clears the ice. Do not chip ice off any surface with a screwdriver, because the tubing behind it is soft aluminium.
Models in the KS family
Reference| Model number | Family key |
|---|---|
| KS-35F | cowsar:refrigerator:ks |
| KS-40R | cowsar:refrigerator:ks |
Where the owner line falls here
The split on these models is not subtle. Checking the supply, the filter, the bail arm and the compartment temperature is owner work. Call when the mould is wet and never harvests, when the fill tube re-frosts within days of being cleared, or when the ice problem is really a temperature problem, because that moves the job into the cold path. On this platform the cabinet has to come away from the wall before most work can start, which is a two-person job on a loaded cabinet.
Other faults on these models
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
