The short answer
Noise from a Best Appliance BAMFC washer is diagnosed by which part of the cycle produces it. On this family a rumble or knock during the spin points at bearings or an unbalanced load, a grinding during the drain points at the pump, and a clatter at any speed usually means something is in the drum that should not be.
What an owner actually sees
- A loud rumble that rises with the spin and continues as it slows — Drum bearing wear. It grows over months and is the most expensive answer on the list.
- Banging or walking across the floor during the spin — An unbalanced load or a machine that is not level. Alarming and usually free to fix.
- A clatter that keeps time with the drum at any speed — An object between the inner and outer drums. Underwires and coins are the classic finds.
- NEAR MISS — the drum will not spin at all — A machine that is quiet because it refuses to spin has a lock, drainage or motor fault rather than a noise fault.
What it usually turns out to be, in order
- Unbalanced load or a machine that is not level — First on this family. A heavy item on one side of the drum, or a cabinet standing on three of its four feet, produces banging and walking that sound like a structural failure and are neither.
- Object caught between the inner and outer drums — Second. Underwires, coins and hooks work through the drum perforations and then rattle at every speed.
- Shipping bolts not removed — Third, and specific to recently delivered or recently moved machines. The drum is held rigid and hammers against its own suspension, and the damage accumulates from the first cycle.
- Drain pump obstructed or its impeller damaged — Fourth. It is audible only during the drain step, which makes the timing diagnostic, and it usually means an object rather than a failed motor.
Check in this order, and why
- 1. Run a spin with the drum completely empty — Quiet means the machine is fine and the loading is the fault. Still noisy means you have real evidence rather than a suspicion. The BAMFC family is a single model number, so everything on this page applies to it without qualification.
- 2. Rock the cabinet at each corner and adjust the feet — All four must be loaded. On a machine that has recently been moved, check for shipping bolts at the same time. A single-model family means the access described here applies to your appliance without reservation.
- 3. Open the drain filter and look at what is in it — Coins, hooks and underwires here suggest more of the same between the drums, and the filter is the accessible half of that problem. Leave this until the cheaper checks are settled.
Read this before touching the appliance
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. Never reach into a drum that is still turning and never defeat a lid switch or door lock to watch a spin — a loaded drum at speed does not stop quickly.
Models in the BAMFC family — The model numbers this page covers.
Reference| Model number | Family key |
|---|---|
| BA-MFC120-FDW | best-appliance:washer:bamfc |
Owner fix or service call
Call when the machine is level, the load is balanced, the filter is clear and an empty spin still rumbles — because that is the drum bearing and it means the machine comes apart. Ask for a repair-or-replace opinion at the same time, since a bearing job on many builds approaches the value of the appliance. Levelling, redistributing, removing shipping bolts and clearing the filter are owner work and resolve most of these calls.
Nearby pages for these models
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
