Is it safe to keep using a noisy dryer?

A rattle from a coin is harmless once removed. A grinding or a thump from a bearing is not — running it on turns a small repair into a drum or motor replacement.

How do I tell a belt noise from a bearing noise?

A belt or idler noise is usually a squeal that follows speed. A bearing or roller noise is a rumble or thump that repeats once per drum revolution.

Why is it louder when the machine is empty?

A load damps the drum. Running empty removes that damping, which is why an empty-drum test makes a mechanical noise much easier to hear.

Can levelling really fix a noise?

It fixes a knock, which is the machine moving against the floor rather than a part failing. It will not fix a rumble that is present with the machine held steady.

Does the Beko badge change the answer?

It changes the order, which is what matters. This machine is built on the Beko European platform — Arcelik engineering at a value price, with European drain layouts, inner filters and base-pan flood protection, so the same symptom points at a different first check than it would on another badge.

Want a regional phone & address? Pick your area.

Back to Blog

Brand=Beko|Appliance=Dryer|Symptom=Abnormal-Noise14 min read

Beko Dryer Unusual Noise

Sarah Chen·Lead Appliance Repair Technician

2026-09-12·14 min read·EPA 608 Universal

Table of Contents

Beko Dryer: Unusual Noise

The fault is in front of you, and the useful question is which cause is likeliest on this brand. On a Beko dryer that is making a new noise, the finding that comes up most often is coins, buttons or a wire from a garment in the drum or the blower, followed by a machine out of level or resting on something. A dryer noise is identified by its rhythm — a thump per drum revolution, a continuous squeal, or a rattle that comes and goes each point to a different part. That first cause is owner work; the ones below it stop being owner work quickly.

What you are seeing

a rhythmic thump once per drum turn
a squeal or shriek that rises with the drum speed
a scraping or grinding from one side of the machine
Not this fault: If the noise stops when you remove the load, check the pockets and the load itself before the machine
Body: What you are seeing: a rhythmic thump once per drum turn; a squeal or shriek that rises with the drum speed; a scraping or grinding from one side of the machine. If the noise stops when you remove the load, check the pockets and the load itself before the machine.

Ranked causes on a Beko dryer

Coins, buttons or a wire from a garment in the drum or the blower — Tag: usage — Why: It leads because it is both the most common finding and the cheapest to eliminate. — Presentation: A sharp irregular rattle, often worse at high speed, that started suddenly with no warning.
A machine out of level or resting on something — Tag: install — Why: It ranks high here because Beko drain and fill routing follows European practice, and it is very often installed to a US convention that does not match it. — Presentation: A knocking that stops when a corner is pressed down, or a machine that rocks when nudged.
Worn drum support rollers — Tag: mechanical — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A rhythmic thump or rumble that grows steadily over weeks and is present with an empty drum.
A worn idler pulley or belt — Tag: mechanical — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A squeal or chirp that rises with speed, sometimes fading once the machine is warm.
Body: Ranked for a Beko dryer — the order is the point. First: coins, buttons or a wire from a garment in the drum or the blower. It leads because it is both the most common finding and the cheapest to eliminate. A sharp irregular rattle, often worse at high speed, that started suddenly with no warning. Second: a machine out of level or resting on something. It ranks high here because Beko drain and fill routing follows European practice, and it is very often installed to a US convention that does not match it. Third: worn drum support rollers. It sits at this position because the causes above it are more common, cheaper to check, or both. Fourth: a worn idler pulley or belt. It sits at this position because the causes above it are more common, cheaper to check, or both.

What to check, in order

Coins, buttons or a wire from a garment in the drum or the blower — Reason: It is first because it is both the most common finding on this machine and the cheapest thing to eliminate.
A machine out of level or resting on something — Reason: It comes second because coins, buttons or a wire from a garment in the drum or the blower either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Worn drum support rollers — Reason: It comes third because a machine out of level or resting on something either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Body: The order below follows the ranking: cheapest and likeliest first. There is a standing rule on this platform: check the filter and the base pan first — Beko follows the European convention of protecting itself by stopping. First, coins, buttons or a wire from a garment in the drum or the blower. It is first because it is both the most common finding on this machine and the cheapest thing to eliminate. Second, a machine out of level or resting on something. It comes second because coins, buttons or a wire from a garment in the drum or the blower either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports. Third, worn drum support rollers. It comes third because a machine out of level or resting on something either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.

Checks you can make safely

Empty the drum and turn it slowly by hand listening for something loose, then check the lint trap housing with a torch — Tools: a torch — Time: a few minutes — Targets: Coins, buttons or a wire from a garment in the drum or the blower
Rock the machine at each corner and level it with the adjustable feet until it sits solidly — Tools: a spirit level and a wrench — Time: a quarter of an hour — Targets: A machine out of level or resting on something
Turn the empty drum by hand and listen for a repeating bump at the same point of each turn — Tools: nothing — Time: a few minutes — Targets: Worn drum support rollers
Body: The checks a homeowner can safely make, in the order that eliminates most for least effort. Step one: Empty the drum and turn it slowly by hand listening for something loose, then check the lint trap housing with a torch. Tools: a torch. Allow a few minutes. Step two: Rock the machine at each corner and level it with the adjustable feet until it sits solidly. Tools: a spirit level and a wrench. Allow a quarter of an hour. Step three: Turn the empty drum by hand and listen for a repeating bump at the same point of each turn. Tools: nothing. Allow a few minutes. Stop at the first step that would put a meter on live terminals or open a sealed system — that is where owner work ends.

Before you touch anything

Safety

A dryer is heavy and its panels have sharp edges. Unplug the machine or switch its breaker off before removing a panel, get help before moving it, and never run it with a panel removed to chase a noise. One thing to keep in mind on this platform: European drain and fill layout rather than the US convention — that changes where your hands go. electrical heavy Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off.

When to stop and call

Call a technician if any of these is true: the noise is rhythmic with the drum and present when empty, which points at rollers or a bearing; a squeal follows the belt path; the noise comes from the blower and the airflow is affected. Above that line the next measurement is on live terminals or inside a sealed system. the noise is rhythmic with the drum and present when empty, which points at rollers or a bearing a squeal follows the belt path the noise comes from the blower and the airflow is affected

Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.

General guidance

Unplug before service — Manufacturer service manuals, universally; OSHA 1910.147 for the principle., fetched 2026-09-05

Nearest pages of the same kind — Nearest pages of the same kind: maytag-dryer-heating-failure; ge-dryer-heating-failure; kenmore-dryer-heating-failure.

What this page does not cover

Generalized information: this covers the Beko dryer as a platform, not one model. It carries no model-specific codes, service sequences or part numbers. Other faults on this same machine: beko-dryer-control-fault, beko-dryer-cycle-fault, beko-dryer-wont-start-2. The same fault on other platforms, where it ranks differently: samsung-dryer-abnormal-noise, ge-dryer-abnormal-noise. Read the model number from the appliance tag before ordering any part — that is the axis this page does not resolve.

Links down: - [Beko Dryer: Controls, Display or Error Code](/blog/beko-dryer-control-fault) - [Beko Dryer: Cycle Will Not Run or Complete](/blog/beko-dryer-cycle-fault) - [Beko Dryer: Will Not Start or No Power](/blog/beko-dryer-wont-start-2)

Links across: - [Samsung Dryer: Abnormal Noise or Vibration](/blog/samsung-dryer-abnormal-noise) - [GE Dryer: Abnormal Noise or Vibration](/blog/ge-dryer-abnormal-noise)

Sarah Chen

Lead Appliance Repair Technician · 12 years experience

EPA 608 UniversalNASTeC Certified

Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.

On this page

Frequently Asked Questions

Is it safe to keep using a noisy dryer?: A rattle from a coin is harmless once removed. A grinding or a thump from a bearing is not — running it on turns a small repair into a drum or motor replacement.
How do I tell a belt noise from a bearing noise?: A belt or idler noise is usually a squeal that follows speed. A bearing or roller noise is a rumble or thump that repeats once per drum revolution.
Why is it louder when the machine is empty?: A load damps the drum. Running empty removes that damping, which is why an empty-drum test makes a mechanical noise much easier to hear.
Can levelling really fix a noise?: It fixes a knock, which is the machine moving against the floor rather than a part failing. It will not fix a rumble that is present with the machine held steady.
Does the Beko badge change the answer?: It changes the order, which is what matters. This machine is built on the Beko European platform — Arcelik engineering at a value price, with European drain layouts, inner filters and base-pan flood protection, so the same symptom points at a different first check than it would on another badge.

Need this fixed for good?

Can't fix it yourself? Our vetted technicians are ready to help.

Book a Free Diagnostic Visit

Same-day service • 90-day warranty • Free diagnostic visit

Call NowAvailable 24/7 — call or textBook Online

Need Brand=Beko|Appliance=Dryer|Symptom=Abnormal-Noise Repair?

(415) 795-7300Available 24/7 — call or textBook Free Diagnosis

Back to Blog

Brand=Beko|Appliance=Dryer|Symptom=Abnormal-Noise14 min read

Beko Dryer Unusual Noise

Sarah Chen·Lead Appliance Repair Technician

2026-09-12·14 min read·EPA 608 Universal

Table of Contents

Beko Dryer: Unusual Noise

What you are seeing

a rhythmic thump once per drum turn
a squeal or shriek that rises with the drum speed
a scraping or grinding from one side of the machine
Not this fault: If the noise stops when you remove the load, check the pockets and the load itself before the machine
Body: What you are seeing: a rhythmic thump once per drum turn; a squeal or shriek that rises with the drum speed; a scraping or grinding from one side of the machine. If the noise stops when you remove the load, check the pockets and the load itself before the machine.

Ranked causes on a Beko dryer

Coins, buttons or a wire from a garment in the drum or the blower — Tag: usage — Why: It leads because it is both the most common finding and the cheapest to eliminate. — Presentation: A sharp irregular rattle, often worse at high speed, that started suddenly with no warning.
A machine out of level or resting on something — Tag: install — Why: It ranks high here because Beko drain and fill routing follows European practice, and it is very often installed to a US convention that does not match it. — Presentation: A knocking that stops when a corner is pressed down, or a machine that rocks when nudged.
Worn drum support rollers — Tag: mechanical — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A rhythmic thump or rumble that grows steadily over weeks and is present with an empty drum.
A worn idler pulley or belt — Tag: mechanical — Why: It sits at this position because the causes above it are more common, cheaper to check, or both. — Presentation: A squeal or chirp that rises with speed, sometimes fading once the machine is warm.
Body: Ranked for a Beko dryer — the order is the point. First: coins, buttons or a wire from a garment in the drum or the blower. It leads because it is both the most common finding and the cheapest to eliminate. A sharp irregular rattle, often worse at high speed, that started suddenly with no warning. Second: a machine out of level or resting on something. It ranks high here because Beko drain and fill routing follows European practice, and it is very often installed to a US convention that does not match it. Third: worn drum support rollers. It sits at this position because the causes above it are more common, cheaper to check, or both. Fourth: a worn idler pulley or belt. It sits at this position because the causes above it are more common, cheaper to check, or both.

What to check, in order

Coins, buttons or a wire from a garment in the drum or the blower — Reason: It is first because it is both the most common finding on this machine and the cheapest thing to eliminate.
A machine out of level or resting on something — Reason: It comes second because coins, buttons or a wire from a garment in the drum or the blower either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Worn drum support rollers — Reason: It comes third because a machine out of level or resting on something either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.
Body: The order below follows the ranking: cheapest and likeliest first. There is a standing rule on this platform: check the filter and the base pan first — Beko follows the European convention of protecting itself by stopping. First, coins, buttons or a wire from a garment in the drum or the blower. It is first because it is both the most common finding on this machine and the cheapest thing to eliminate. Second, a machine out of level or resting on something. It comes second because coins, buttons or a wire from a garment in the drum or the blower either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports. Third, worn drum support rollers. It comes third because a machine out of level or resting on something either accounts for the fault or, once ruled out, leaves this as the next thing the evidence supports.

Checks you can make safely

Empty the drum and turn it slowly by hand listening for something loose, then check the lint trap housing with a torch — Tools: a torch — Time: a few minutes — Targets: Coins, buttons or a wire from a garment in the drum or the blower
Rock the machine at each corner and level it with the adjustable feet until it sits solidly — Tools: a spirit level and a wrench — Time: a quarter of an hour — Targets: A machine out of level or resting on something
Turn the empty drum by hand and listen for a repeating bump at the same point of each turn — Tools: nothing — Time: a few minutes — Targets: Worn drum support rollers
Body: The checks a homeowner can safely make, in the order that eliminates most for least effort. Step one: Empty the drum and turn it slowly by hand listening for something loose, then check the lint trap housing with a torch. Tools: a torch. Allow a few minutes. Step two: Rock the machine at each corner and level it with the adjustable feet until it sits solidly. Tools: a spirit level and a wrench. Allow a quarter of an hour. Step three: Turn the empty drum by hand and listen for a repeating bump at the same point of each turn. Tools: nothing. Allow a few minutes. Stop at the first step that would put a meter on live terminals or open a sealed system — that is where owner work ends.

Before you touch anything

Safety

When to stop and call

Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.

General guidance

Unplug before service — Manufacturer service manuals, universally; OSHA 1910.147 for the principle., fetched 2026-09-05

Nearest pages of the same kind — Nearest pages of the same kind: maytag-dryer-heating-failure; ge-dryer-heating-failure; kenmore-dryer-heating-failure.

What this page does not cover

Links across: - [Samsung Dryer: Abnormal Noise or Vibration](/blog/samsung-dryer-abnormal-noise) - [GE Dryer: Abnormal Noise or Vibration](/blog/ge-dryer-abnormal-noise)

Sarah Chen

Lead Appliance Repair Technician · 12 years experience

EPA 608 UniversalNASTeC Certified

Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.

On this page

Frequently Asked Questions

Is it safe to keep using a noisy dryer?: A rattle from a coin is harmless once removed. A grinding or a thump from a bearing is not — running it on turns a small repair into a drum or motor replacement.
How do I tell a belt noise from a bearing noise?: A belt or idler noise is usually a squeal that follows speed. A bearing or roller noise is a rumble or thump that repeats once per drum revolution.
Why is it louder when the machine is empty?: A load damps the drum. Running empty removes that damping, which is why an empty-drum test makes a mechanical noise much easier to hear.
Can levelling really fix a noise?: It fixes a knock, which is the machine moving against the floor rather than a part failing. It will not fix a rumble that is present with the machine held steady.
Does the Beko badge change the answer?: It changes the order, which is what matters. This machine is built on the Beko European platform — Arcelik engineering at a value price, with European drain layouts, inner filters and base-pan flood protection, so the same symptom points at a different first check than it would on another badge.

Need this fixed for good?

Can't fix it yourself? Our vetted technicians are ready to help.

Book a Free Diagnostic Visit

Same-day service • 90-day warranty • Free diagnostic visit

Call NowAvailable 24/7 — call or textBook Online

Need Brand=Beko|Appliance=Dryer|Symptom=Abnormal-Noise Repair?

(415) 795-7300Available 24/7 — call or textBook Free Diagnosis

Beko Dryer Unusual Noise

Beko Dryer: Unusual Noise

What you are seeing

Ranked causes on a Beko dryer

What to check, in order

Checks you can make safely

Before you touch anything

When to stop and call

Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.

Nearest pages of the same kind — Nearest pages of the same kind: maytag-dryer-heating-failure; ge-dryer-heating-failure; kenmore-dryer-heating-failure.

What this page does not cover

Related pages — Where a reader on this page usually goes next — other faults on the same Beko dryer: beko-dryer-control-fault; beko-dryer-cycle-fault; beko-dryer-wont-start-2, and the same fault on another platform: samsung-dryer-abnormal-noise; ge-dryer-abnormal-noise.

Frequently Asked Questions

Need this fixed for good?

Beko Dryer Unusual Noise

Beko Dryer: Unusual Noise

What you are seeing

Ranked causes on a Beko dryer

What to check, in order

Checks you can make safely

Before you touch anything

When to stop and call

Where the figures come from — No warehouse measurement is quoted here; the only figures on this page are the published safety constants, verbatim: Unplug before service.

Nearest pages of the same kind — Nearest pages of the same kind: maytag-dryer-heating-failure; ge-dryer-heating-failure; kenmore-dryer-heating-failure.

What this page does not cover

Related pages — Where a reader on this page usually goes next — other faults on the same Beko dryer: beko-dryer-control-fault; beko-dryer-cycle-fault; beko-dryer-wont-start-2, and the same fault on another platform: samsung-dryer-abnormal-noise; ge-dryer-abnormal-noise.

Frequently Asked Questions

Need this fixed for good?