This model line in one paragraph
the ATMA line covers the model numbers in the table on this page, and nothing else. It is a short list of closely related models. On a family like this the two that come up most are ice maker not producing, or producing badly and water inside the cabinet or on the floor.
What goes wrong, and where it is covered
- Ice maker not producing, or producing badly — No ice at all, hollow or undersized cubes, or a bin of cubes fused into one lump. Covered on: Arctic King ATMA Refrigerator: Ice Maker Fault. — Slug: arctic-king-arctic-king-refrigerator-atma-refrigerator-ice-production — Title: Arctic King ATMA Refrigerator: Ice Maker Fault
- Water inside the cabinet or on the floor — Water pooling under the crisper drawers, a sheet of ice in the same place, or a puddle at the front of the floor. Covered on: Arctic King ATMA Refrigerator: Water Leak. — Slug: arctic-king-arctic-king-refrigerator-atma-refrigerator-water-leak — Title: Arctic King ATMA Refrigerator: Water Leak
- Noise or vibration — A vibration felt through the floor, or a noise that changes when the cabinet is leaned on. Covered on: Arctic King ATMA Refrigerator: Abnormal Noise or Vibration. — Slug: arctic-king-arctic-king-refrigerator-atma-refrigerator-abnormal-noise — Title: Arctic King ATMA Refrigerator: Abnormal Noise or Vibration
- Not cooling, or not holding temperature — Food at the door spoils early, the unit never cycles off, and a frost sheet builds at the back of the freezer section. Covered on: Arctic King ATMA Refrigerator: Not Cooling or Not Freezing. — Slug: arctic-king-arctic-king-refrigerator-atma-refrigerator-cooling-failure — Title: Arctic King ATMA Refrigerator: Not Cooling or Not Freezing
Which of these comes up most
- 1. Ice maker not producing, or producing badly — Not every model in the table is built with an ice maker, so the first question on this class is whether the cabinet has one at all.
- 2. Water inside the cabinet or on the floor — Condensation and drainage account for nearly all of this class on cabinets of this build.
- 3. Noise or vibration — Most of this class is resonance or ice against a fan blade rather than a failing part.
- 4. Not cooling, or not holding temperature — On this family the seal and the placement account for more of this class than any component failure does.
Models in the ATMA family
Reference| Model number | Family key |
|---|---|
| ATMA100AEB | arctic-king:refrigerator:atma |
| ATMA100AES | arctic-king:refrigerator:atma |
| ATMA100AEW | arctic-king:refrigerator:atma |
| ATMA115AEB | arctic-king:refrigerator:atma |
| ATMA115AES | arctic-king:refrigerator:atma |
| ATMA115AEW | arctic-king:refrigerator:atma |
Where faults land on this family — Ordering only: no sampled denominator backs it, so no share figure is given.
General guidance| Problem class | Relative frequency |
|---|---|
| Ice maker not producing, or producing badly | most common |
| Water inside the cabinet or on the floor | common |
| Noise or vibration | less common |
| Not cooling, or not holding temperature | least common |
Where owner work stops on this family
The line on these models sits where the tools change. If it can be done with the cabinet emptied and the power off — a seal, a drain, a level, a clean — it is owner work.
Neighbouring model lines
SC
Sarah Chen
Lead Appliance Repair Technician · 12 years experience
EPA 608 UniversalNASTeC Certified
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
