The short answer
The ARC family is one freezer platform whose model numbers share a prefix, and the two complaints that dominate are a cabinet that will not hold temperature and water where it should not be, both of which trace back to the seal.
Problems on this family, and where each is answered
- Noise that is new or has changed — A noise that changes when you rock the cabinet is the installation rather than a part - see: Arctic King ARC Freezer: Abnormal Noise or Vibration. — Slug: arctic-king-arctic-king-freezer-arc-freezer-abnormal-noise
- Runs, but will not hold temperature — Softening contents with the compressor running continuously, where the seal and the frost load come first - see: Arctic King ARC Freezer: Not Cooling or Not Freezing. — Slug: arctic-king-arctic-king-freezer-arc-freezer-cooling-failure
- Water inside the cabinet or on the floor — Inside means ice that got past the seal; outside with a dry interior means a cold skin sweating - see: Arctic King ARC Freezer: Water Leak. — Slug: arctic-king-arctic-king-freezer-arc-freezer-water-leak
Problem classes in frequency order here
- Runs, but will not hold temperature — First here, and the widest set of causes: a seal, a stalled defrost and a start device all present the same way.
- Water inside the cabinet or on the floor — Second, and almost always downstream of a blocked drain or a seal letting humid air in, which is why so much of it is fixed for nothing.
- Noise that is new or has changed — Third: on cabinets this light the installation causes most noise complaints, and those are the cheapest to resolve.
Models in the ARC family
Reference| Model number | Family key |
|---|---|
| ARC04B2C** | arctic-king:freezer:arc |
| ARC05B2C** | arctic-king:freezer:arc |
| ARC07B2C** | arctic-king:freezer:arc |
Where faults land on this family — Ordering only: no sampled denominator backs it, so no share figure is given.
General guidance| Area | Relative frequency |
|---|---|
| Seal, and the ice load it causes | most common |
| Installation: level, clearance, ambient | common |
| Start device and thermostat | less common |
| Sealed system and compressor | least common |
Owner job, or service call
Owner work here is the seal, the level, the clearance, the drain and the frost load; call a technician once the fault is on the sealed system, when the compressor knocks or a start device clicks without settling, or when the cabinet will not hold temperature after being defrosted, sealed and given clearance.
Other families of this brand
SC
Sarah Chen
Lead Appliance Repair Technician · 12 years experience
EPA 608 UniversalNASTeC Certified
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
