What this usually is
This fault reads the same on every make, but it does not rank the same. On the A models it is usually a drain pan or tray vibrating in its cradle. This line is a close pair of models rather than a spread, so the build is effectively uniform and the seal-and-fit causes come forward.
What the owner actually sees
- A scraping or warbling noise from inside the freezer — It rises and falls, and it stops when the cooling cycle stops.
- A rattle from low at the back of the cabinet — Loudest when the compressor is running and gone when it is not.
- The whole cabinet vibrates against the floor or the cupboard beside it — You can feel it through the worktop as much as hear it.
- NEAR MISS — a hiss or gurgle after the compressor stops — That is refrigerant settling and it is normal on every cabinet ever built.
What it usually turns out to be, in order on the A line
- A drain pan or tray vibrating in its cradle — Ranked first here — it is a loose part rather than a failing one and it usually rattles only when the compressor runs.
- A fan blade catching on frost — Second here — it is the noise owners describe most often and it comes and goes with the cooling cycle, which is the tell.
- A cabinet that is not standing level — Third here — it costs nothing to rule out and because it makes every other noise on the list louder.
- Body: Two closely related models means what holds for one holds for the other, which is why the order below is stated without a hedge. Concretely, a drain pan or tray vibrating in its cradle outranks a fan blade catching on frost here, and that is the difference worth reading for.
What to look at first, second, third
- Reach under the cabinet and steady the pan while the compressor is running — If the noise stops under your hand, you have found it.
- Open the freezer and hold the door switch in — A scrape or warble that appears with the switch held in, and stops when you let go, places the noise inside the freezer.
- Push the top corners of the cabinet gently front to back and side to side — Any rock at all means the feet are carrying it unevenly, and that is where the buzz is being amplified.
- Body: Two closely related models share a layout, so a check that works on one works on the other and the order below does not change between them. Work them in order: each one clears the cause it sits beside, and the next is only worth doing once the one before it is clean.
Switch it off first
Safety
Unplug the appliance or switch off its breaker before removing any panel — a capacitor can hold a charge after the power is off. A refrigerator is a heavy cabinet on small feet: pull it out squarely with a hand on each side and never tip it to look underneath while it is plugged in. Keep fingers clear of any fan you have exposed, and do not hold a fan blade still to test it.
Models in the A family — Every model this page covers, exactly as the model line is recorded. Nothing outside this table is a model number, and nothing on this page claims to cover a model that is not in it.
Reference| Model number | Family key |
|---|---|
| A8TXNGFB*0* | amarilis:refrigerator:a |
| A8TXNWFB*0* | amarilis:refrigerator:a |
Where owner work stops
Call when the noise sits behind the freezer rear panel, when it comes with a loss of cooling, or when it has changed from a hum into a knock — a knock is a moving part striking something, and it does not improve. Stop and call at once for a burning smell or a scorch mark at the back of the cabinet.
Related pages at this level
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
